-
Anonymous users2024-01-24Remove with a shovel + sandpaper to remove wood paint. Use sandpaper to polish the surface of the furniture before painting. The paint should be adjusted well, and the brush should not be stained with too much paint when brushing, so as not to fall.
-
Anonymous users2024-01-23It's okay to find a piece of gauze or gauze mask, and buy a bottle of industrial absolute ethanol (commonly known as: industrial alcohol, with a concentration of more than 95%). Pour it on the gauze, don't get wet to the extent of dripping, just wipe it off, and the primer will be wiped out if you over-clean it, pay attention to it.
-
Anonymous users2024-01-22Don't waste time and manpower downstairs, if you want to remove it completely, go to the paint shop to sell paint remover, but be careful when using it,,, he can completely separate the paint automatically,,, I am an international paint master, for Nippon, Dulux construction,].
-
Anonymous users2024-01-21If the home is wooden, it can only be removed by it, because it is divided into primer, topcoat, etc.
If there are stains on the surface of the cloth fabric, you can wipe it from the outside to the inside with a clean rag dipped in water or use it with a fabric cleaner according to the instructions. Avoid sitting on the sofa with sweat, water and mud. Wash it about once every six months or so. >>>More
We often encounter various stains in the production process of sofas, how to solve them? It's not that there is no above method, you can use banana water, rosin perfume, alcohol, which are not harmful to the human body, to clean and wipe or spray on the stains, and the effect is obvious. The principle of banana water and rosin perfume is that it can dilute and dissolve stains. >>>More
There are many reasons for paint cracking, and the paint is most taboo to be painted on damp walls, which will undergo chemical changes after being wet, which is also the main reason why many new houses often have paint peeling and peeling. Therefore, it is best to wait until the walls are completely dry before applying paint. If the paint surface has fallen off, you can scrape off the falling part with a putty knife, and then use cellulose putty or paint and gypsum powder naughty putty to flatten the unevenness and pits, and smooth it with sandpaper after drying, and then paint it. >>>More
Rub it vigorously with an eraser, and although it is a bit troublesome, it can be cleaned up.
Put a few mothballs at the foot of the cabinet or in the place where the worms have been gnawed.