-
Anonymous users2024-01-24How can a floor drain cover fall into a floor drain? Broken? Then find a way to get it, tie a magnet with a wooden stick or rope, and fix it firmly with a plastic tube on the outside (to reduce the attraction of the magnet to the wall of the floor drain pipe, we will call it a directional magnet) and slowly slide down to the floor drain and slowly lift it up.
Be careful in the future. It should be a problem of waterproofing in the bathroom, and the specific repair methods are as follows: prepare tools and materials:
CF* cementitious water repellent agent, a chisel, brush. The operation steps are as follows: the first step is to use a chisel to open a 2-3 cm wide annular groove around the floor drain opening.
The depth is about 3 cm. However, if there are loose or gaps around the pipe during the slotting process, it should continue to be chiseled. Until the above situation is cleared up.
The second step is to clean the trough with a clean water brush.
-
Anonymous users2024-01-23Match it with one more. Hope.
-
Anonymous users2024-01-22The bathroom floor drain cover is gone, you can buy a new one from the same as before, or use the iron sheet to make a hole in the drain, so you can do it.
For water seepage, that is, to find out the source, in the demolition and rectification, so that in the waterproofing piece, it can be repaired later.
Now the floor drain on the market can not completely prevent the smell of back, change to a good floor drain, the kind with a flip cap in the pipe, regularly clean the pipe, use the pipe descaling cleaner, the detergent should be good, some are corrosive, or do not corrode the PVP pipe.
1.Replace the floor drain Try to choose a water-sealed floor drain. >>>More
Why do you want to wipe off the glue in the cracks, you are not afraid of water leakage on the ground!
Newly renovated house ceiling cracking, the solution is as follows: >>>More