-
Anonymous users2024-01-24The hollow drum is due to the fact that the mortar is not full or the tile is not gently beaten and compacted when the tile is paved; The tiles are not soaked in water or soaked enough before they are laid; The plastering of the base layer of the wall is not treated according to the requirements or the garbage of the base is not cleaned up, which has little to do with whether or not to walk. There is no other way but to rework. The main effect of the hollow drum is that the bricks may crack if you walk too much, and the sound is louder when you walk, if it does not affect the use, it is recommended not to move it first.
Because there will be color difference in different batches of bricks, it will not look good when paved. However, if it affects the use or the hollow drum range is large, it is recommended to rework.
Leave 16 to 17 centimeters wide space around the living room floor, lay the strip edge space for 150 * 150 small bricks, calculate the best configuration of 800 * 800 whole bricks, lay the whole brick to the inner edge of the strip around, cut off the excess, make up the triangle space with the processed triangle bricks, and finally paste the strip edge around it, and call it a day.
If you use scattered bricks, you won't waste bricks, because the bricks cut on this side can be used to make up for the bricks cut on this side at 7 meters. >>>More
Generally speaking, the thickness of the floor tile paving (the total thickness of the dry ash layer and cement mortar of the tile plus the bottom layer) is about 5cm, to determine the thickness of the ground leveling, you have to determine the thickness of your parquet. >>>More
The place where you don't take a bath can be laid, but the one that takes a bath is best to use 300*300, because there is a floor drain in the bathing place, and if you use a large bunk, it is not conducive to water flow.
Black or transparent open-bottomed flowers.