How to change the light bulb in the bathroom ceiling? It is embedded, do you want to remove the ceil

There should be no need to remove the ceiling, the bulb on the top surface is installed after the ceiling is ready, and the bulb should be dismantled directly. It is recommended to find an electrician or other person who is familiar with the renovation to help you solve this problem.

1.The first step in changing the bulb is to disassemble and unload the ceiling lamp, you need to grasp the frame of the ceiling lamp, and pull the frame down until you see the spring inside, and then press the spring in the direction of the ceiling, so that you can remove the ceiling lamp. If you can't remove it according to the above method, then try to remove the square gusset next to the ceiling lamp. >>>More

1. Disassembly of ceiling lamp:

First of all, remove the lampshade, the lampshade is the simplest, there should be a small arrow on the side of the mask, you press it to open, it is a live clip, you will see the wiring after removing the lampshade, remove the zero line of the live wire with a screwdriver, and finally remove the chassis directly. There is also a kind of embedded ceiling lamp that is fixed with a live clip, and there is no screw, so just pull it down directly, and the clip on the chassis is just stuck on the ceiling, and you can take it off. >>>More

However, the acrylic bathtub has a good cost performance, but the weight of the cast iron bathtub is very large, the noise is small, it is not suitable for handling and installation, and the price on the market is also very expensive, easy to age, read the following answer I believe you should have the answer! Hopefully, my answer will help you, easy to handle and install. However, the disadvantage of acrylic bathtubs is that they are easy to fade and are easy to be scratched. >>>More

Ceiling lamp is a kind of lamp, which is generally installed in bedrooms and living rooms, such as adsorbed on the roof, so it is called ceiling lamp. Ordinary round ceiling lamps are generally dragged to the left and right of the lampshade to screw, if it is square, it is buckled, find the gap between the lampshade and buckle hard. There is also a clamp on the top of the lampshade, and the card is sat on at the end, and the clamp is pulled over by hand and the lampshade is directly down. >>>More