To prevent the leakage quality of the toilet, what requirements should be paid attention to in the c

The key is to do a good job of waterproofing! Several links should be focused on: grassroots - it is required to be smooth, clean without protrusions and cement without oil stains; Waterproof layer - the thickness of the brushing type must be guaranteed, and there can be no omission, and the width of the lap joint of the membrane type should be more than 8 cm; The waterproof layer must be made of protective layer mortar to avoid damage by workers.

The root of the pipe that penetrates the floor slab must be strengthened and waterproofed, and the height should be higher than the ground. After the waterproof layer is completed, a 24-hour closed water experiment is done, and a closed water test is done again after the brick is pasted. Pass without leaking!

The construction should pay attention to the following points: 1. The construction height of the wall of the bath room should be 180CM, and the rest should pay attention to the construction around the corner and the water pipe, 3. After the construction is completed, the closed water test must be done, and if there is water seepage, it needs to be repaired in time. Finally, it is necessary to let the follow-up construction personnel (tiles) pay attention not to damage the waterproof layer.

Wanren waterproof: 0510-87931658