-
Anonymous users2024-01-24There are many reasons for not being enough, such as the heating is blocked, the gas needs to be deflated, the number of radiators is not enough, the number of radiators needs to be added, the water pressure of the heating is not enough, the water temperature is too low, etc
-
Anonymous users2024-01-23The pipes are not smooth and the water is discharged.
Plumbing? If the heating is not hot as a whole, it may be that the water is entering or the return valve is not open. If the heating in a single room is not hot, it may be caused by the radiator's nest and not deflated before use. >>>More
1. It is for the shower not to be able to pour the radiator to avoid corrosion and rust of the radiator 2. It is to save space and increase the utilization rate 3. Normally, the location of the radiator installation will be basically installed under the window This setting is for better heating The cold air partition dispersed by the window forms a heating curtain.
If you install a shaking head on the wall, or install an elbow with an outer wire, and install a small back basket, the heating hole you leave is too high, and it is estimated that after the installation, the upper part can top the roof.
Because the bathroom is exposed to water for a long time, the radiator is easy to peel off and rust. If it is not handled properly, it will be blocked. If you don't understand this fast, it is recommended to go to a professional maintenance personnel to see. This will avoid unnecessary trouble at home.
Mul.
1. If the bathroom radiator is not hot, it may be the phenomenon of "gas blockage" in the home heating, and then you need to vent the radiator, the specific method is as follows: 牋. >>>More