-
Anonymous users2024-01-24Floor tile plugging agent can be used for toilet leakage, which is made of high-strength material as aggregate, cement as adhesive, auxiliary penetrant, expansion agent, quick-setting agent and other substances. This product is a two-component product, and the hardness after solidification is also good. When using, try to remove the gaps between the floor tiles as much as possible, and brush the floor tile plugging agent into it 2-3 times to dry thoroughly.
-
Anonymous users2024-01-23There is a leak in the bathroom in our home, and in most cases, it may be that there is a problem with the waterproof layer of the bathroom, which causes the water stains to spread. If we use the faucet or shower in the bathroom every time we use it normally, there will be water leakage, and when we usually do not use water, there will be no water leakage, which means that the waterproof layer is damaged or invalid. At this time, we can deal with it by purchasing polymer waterproof repair materials.
The specific processing method and process are also very simple. First of all, it is to stop using the water source in the bathroom for a few days, maintain the normal ventilation of the bathroom, so that some residual water stains will evaporate, and after the floor of our bathroom is dry, you can directly apply the purchased waterproof repair materials. If the location of water seepage is close to the wall or corner, it needs to be applied together at the junction between the ground and the wall and the spread of water stains, and under normal circumstances, it can be dried and cured in one day.
Hello, if the bathroom leaks and does not smash the floor tiles, it will cause the ground to be too high after doing waterproofing, which is not advisable.
Bathroom leakage, first determine what the problem is, if the downstairs is not very serious, there may be a problem of floor drainage, the water does not leak, wipe it around the floor drain. If it doesn't work, stop taking a shower first and see if it doesn't leak, you can use transparent waterproof glue to apply it directly to the tiles. If it doesn't work, close the bathroom door and see, if it doesn't leak, there is a pipe in the wall to soak in water, this situation can not solve the problem without smashing the tiles.
It depends on how it works, I saw one last time just spread a waterproof and non-slip plastic carpet on the tiles.
Look at this state should be the upstairs waterproof layer is not done, if you want to completely solve the problem should be upstairs bathroom floor all planed to do waterproofing.
Of course, it is a pity to smash the tiles, and the cost is high. You can try the kitchen and bathroom without smashing bricks waterproofing agent, and take a look after you get it, it is specifically for bathroom leakage, as long as the pipe is not broken, you can do it. If it still doesn't work after the construction is completed, it proves that the pipeline is ruptured, and you need to find a company that specializes in repairing the pipeline.