How about the quality of Ruibang furniture

In home decoration, there are many furniture made by decoration companies. For the quality inspection of these fixed furniture, many consumers are very concerned. In fact, when you carry out home decoration quality acceptance, as long as you grasp these points, you can control the quality of fixed furniture.

1. The wood, accessories and accessories used in high-end fixed furniture must comply with the provisions in the design. The joints of the furniture production must be tight, the installation must be firm, and the accessories must be complete and effective. The furniture is clean inside and out, fine light on the outside and sanded on the inside.

2. The edge sealing treatment of various wood-based panel parts should be tight and straight, no degumming, smooth and flat surface, and no bumps.

3. The installation position of various plug corners, pressure railing strips and slideways is correct, the installation is flat and firm, and the opening is flexible.

4. Before the product is finished, the visual appearance is smooth and flat, the feel is free of burrs, planing marks, frosting, and reverse lines, and there is no hard crutch at the corner, and the orientation is upright, uniform and straight.

5. The drawer and cabinet door open and close flexibly, and the return is correct. The perimeter of the glass door is polished and neat, flexible in opening and closing, without collapse and scratches, the four corners are symmetrical, and the buckle position is correct.

6. In addition to the use of materials and production sizes, the inspection indicators are as follows

A plate warpage: when the plane diagonal length is greater than 1400 mm, the warpage should be less than 2 mm, when the diagonal length is less than 700 mm, the warpage should be less than 0 5 mm;

b Perpendicularity: when the plane diagonal length is greater than 1000 mm, the error should be less than 1 5 mm; When it is less than 1000 mm, the error should be less than 1 mm.