-
Anonymous users2024-01-24There is water at the door of the bathroom and around it, and there are many problems;
1. The ground brick ash layer is too thick and the water content is too large;
2. The ground slope is not enough, and water accumulates;
3. The grooves around the floor tiles are not as good as the grooves;
4. Water pipe seepage;
If you want to cure it radically, there is only one item to investigate, check the water pipe, only the pressure detection, if it is not leaked, it is a problem in the article.
-
Anonymous users2024-01-23There is a high probability of water leakage. There will be water vapor in the bath, and if you put water, there will be a watermark, and it will definitely leak.
-
Anonymous users2024-01-22Not ventilated? Just kidding,
Is it necessary to remove so many things to repair the tiles in the bathroom? You're doing it redecorate. If this is necessary, others will definitely bear it, if it is not necessary, so the whole of you will be dismantled, which is sure that others will not bear these responsibilities.
Double-sided tape, then glue the sponge on, and you're good to go.
2. The heating temperature is too low. If it is heated to 40 degrees Celsius, then it is recommended to change it to more than 60 degrees Celsius, and there will be more hot water.
There is this possibility, if it happens to drip onto the water heater.
This is the sound of an air explosion, which occurs instantaneously when hot steam or water meets cold water.