Side drain toilet connection with the requirements for floor height

If the aperture of the bottom of the toilet is equal to the distance between the toilet outlet and the wall, and the error is not more than 3 cm, you can use the rubber sealing ring attached to the toilet purchase, and then glue the bottom of the toilet with glass glue.

When your toilet is installed, the spout and drain pipe may not be aligned, and water will flow out of the edge when draining. It doesn't have much impact on use. >>>More

I found the store where I bought the toilet and asked him to open the toilet and open the glue again, and remember that he couldn't use it for 2 days

Find a plugging master to help you fix it, because you need to move the toilet to find out the cause of the leak before you can treat the symptoms. Even after knowing the cause of the leak, you don't have the tools and materials to repair it yourself.

The bottom of the toilet is generally connected to the ground with glue, and cement is also used, but it is relatively rare. The toilet is relatively airtight, and even if the connection between the bottom of the right and the ground is not tightly sealed, it will generally not leak. Therefore, the problem of water seepage should be judged to be clean water, and the bottom of the toilet bowl is an S-shaped pipe, which will not leak without external impact. >>>More