What to do if the bathroom seeps water downstairs

Causes and treatment methods of water seepage from the bathroom downstairs: water leakage caused by broken water pipes, water seepage caused by cracking of joints, and water leakage caused by failure of the waterproof layer.

1. Water leakage caused by broken water pipes

Toilet leakage is likely to be caused by leakage of water pipes, because the service life of water pipes is limited, especially some poor quality water pipes are more likely to be damaged and cause water leakage.

If the sewer pipe is damaged, it will leak downstairs, causing inconvenience to the downstairs neighbors to use the bathroom, so it is necessary to repair it in time, and bury the selected pipes as much as possible during the decoration, and avoid damage during the decoration.

2. Cracking of the joints leads to water seepage

Bathroom wall and ground joints or drain pipe edge joints and other positions, it is easy to leak quickly, these are the weak points of water leakage, it is easy to appear loose sealing, waterproof treatment is not in place, etc., and in the case of a long period of use, water leakage will accumulate over time.

3. Water leakage caused by the failure of the waterproof layer

If the waterproof layer of the bathroom floor is damaged in the decoration, or if it is not properly handled during construction, there will be water leakage, which is more serious.

Bathroom waterproofing precautions:

1. Ensure that the floor of the bathroom is stable

If you need to replace the bathroom floor tiles, you should first remove the original floor tiles, flatten the ground with cement mortar, and then carry out waterproof treatment, so as to avoid leakage caused by uneven application and inconsistent thickness of waterproof materials.

2. The seams should be painted in place

The seam between the floor and the wall is the most problematic area, so it is necessary to apply the waterproof material in place.

3. Wall treatment is also very important

When doing bathroom waterproofing, the wall should also do 30cm waterproof measures, mainly to prevent water from penetrating into the wall, if the bathroom wall is not a load-bearing wall but a light wall, then the entire wall should be coated with waterproof materials.

The steps to solve the problem of water seepage from the bathroom downstairs are as follows:

Tool: Waterproofing layer.

1. First of all, we must find out the place and cause of the water leakage, and clarify the responsibility. If the water seeps downstairs because of a problem upstairs, then the upstairs is responsible; In the same way, if it is not caused by the problem upstairs, it will be solved by the downstairs itself.

>2. In this case, we first go downstairs to check whether there are traces of water seepage on the ceiling and wall, and after determining whether it is the leakage of the upstairs bathroom, find a professional maintenance personnel to check whether it is a leakage caused by the rupture of the pipe, and if so, repair the leakage of the pipeline.

>3. If the water seepage caused by pipeline rupture is excluded, consider the problem that the waterproofing is not in place, and then do the waterproofing again.

The reason why the bathroom seeps water downstairs

1. Water seepage from the inlet pipe: In the face of the question of "what is the cause of water seepage from the bathroom downstairs", the first thing to rule out is the water seepage of the water inlet pipe. The water seepage of the inlet pipe is characterized by continuous water seepage downstairs, and the frequency of water seepage is relatively stable, which has nothing to do with the amount of tap water used in the upstairs bathroom.

The main way to judge is to take the valve of the water inlet pipe in the upstairs bathroom, and wait for a period of time to see if there is any sign of stopping the water seepage downstairs. In addition, the pressure test is carried out on the water inlet pipe suspected of water seepage to see if the water seepage is increasing.

2. Water seepage from the sewer pipe: In the face of the question of "what is the reason for the water seepage from the bathroom downstairs", the second thing to rule out is the seepage of the water inlet pipe. Water seepage from sewer pipes is common, and the amount of water seepage increases with the increase in water consumption for washing or laundry in the morning and evening.

The specific judgment method is to determine the location of specific water seepage by conducting continuous flushing tests on drainage equipment such as floor drains, toilets, and sinks. When testing equipment that touches the ground such as floor drains, it is necessary to pay attention to prevent water from flowing to the ground, which will affect the accuracy of the test.

First, the toilet is closed and then carefully observed. If there are no obvious traces of leakage downstairs during the process of closing the water, it means that there is a problem with the water pipes. First, reconnect all the water pipes under the ground and seal them.

If the water level drops when the water is closed, and the leakage downstairs is serious, it means that the waterproof layer is a problem. Clean off the original waterproof layer first, seal the details with a waterproof strip, and then recoat the waterproof material.

Bathroom leak solution.

1. Determine whether the cause of water leakage is a waterproof problem or a water pipe problem.

If there is no obvious leakage trace downstairs in the process of closing the water, it means that it is not the problem of the waterproof layer, or the problem of the water pipe; If the water level drops when the water is closed, and the leakage downstairs is serious, it means that the waterproof layer is a problem.

2. Waterproof layer leakage solution.

If it is because of the problem caused by the waterproof layer, first cut off the floor tiles and shovel them off, then find the original waterproof layer and clean it up, seal the details with a waterproof strip, and then seal it solidly, and then coat it with waterproof coating, and then seal the floor drain after the waterproof is done.

3. Water pipe leakage solution.

If it is a water pipe leakage, then after the floor tiles are cut apart in Yuzhou, you need to find the joints of the water pipes below, and then re-dock the whole family of these joints, and then seal them.

First of all, don't worry.

I can't eat hot tofu in a hurry.

Secondly, first determine whether the spine is broken or not, and the joints and faucets of the pipes have not been properly handled.

Secondly, see if the pipes are seeping.

The above matters are the easiest to solve.

Third, see if the waterproofing measures are not resolved.

Get the right medicine. The effect is the most good.

Water seepage from the bathroom downstairs needs to be determined first to determine whether the cause of water leakage is a waterproof problem or a water pipe problem, and then solve it in a targeted manner.

If there is no obvious leakage trace downstairs in the process of closing the water, it means that it is not the problem of the waterproof layer, or the problem of the water pipe; If the water level drops when the water is closed, and the leakage downstairs is serious, it means that the waterproof layer is a problem.

If it is because of the problem caused by the waterproof layer, first cut off the floor tiles and shovel them off, then find the original waterproof layer and clean it up, seal the details with a waterproof strip, and then seal it solidly, and then coat it with waterproof coating, and then seal the floor drain after the waterproof is done.

If the water pipe is leaking, then after the floor tiles are planed, you need to find the joints of the water pipes below, and then re-dock all these joints, and then seal them, and then bury the water pipes into the ground after treatment, and then use the plugging treasure or cement mortar to smooth out, repair the waterproofing and then restore the floor tiles, you can use it normally.

Bathroom leakage precautions

1. The bathroom should be waterproof for the first time, and when doing other construction on the ground, special care should be taken not to damage the original waterproof layer, if the waterproof layer is found to be damaged, it should be repaired immediately to prevent water leakage in the future.

2. If you want to replace the floor tiles in the bathroom, the waterproof work will inevitably move. You can use cement mortar to smooth it first, and then do waterproof construction, but it is recommended that you can use polyurethane to apply it repeatedly two or three times before starting construction, which will also help the waterproof project.

3. In addition to the floor of the bathroom, its wall must also be waterproof, and there are many owners who will directly ignore this, the wall waterproofing usually has to be meters, especially the wall and the wall on both sides of the bathroom near the shower head, if the conditions allow the wall to be full, it will be better.

The bathroom seeps water downstairs, first of all, you should judge that it is your leakage point, is that the waterproof of the bathroom is not done, and secondly, check whether all the drainage pipes in the bathroom have leaks, and find the real leakage place can be repaired.

When there is water seepage downstairs in the bathroom, it needs to be treated accordingly. Here are some common ways to deal with it:1

Clarify the cause of water leakage: First of all, it is necessary to clarify the cause of water leakage, if it is a water leakage caused by a ruptured water pipe, you can find the leakage point by pressing or observing the appearance of water leakage, and replace the water pipe. If the waterproofing layer is broken and the waterproofing layer is leaking, the waterproofing layer needs to be repaired.

2.Treatment method: According to different causes of water leakage, take corresponding treatment methods.

For example, if a water pipe is leaking due to a rupture, the water pipe can be replaced; If the waterproofing layer is broken and the water leakage, the waterproofing layer can be repaired. 3.Reworked waterproofing:

If the waterproofing layer is badly damaged, you need to redo the waterproofing layer. When re-doing the waterproof layer, it is necessary to ensure the thickness and uniformity of the waterproof layer, and at the same time, it is necessary to strengthen the weak points such as wall corners, nozzles and sill stones. 4.

Install a shower room: If the bathroom space allows, a shower room can be installed. The shower room can effectively prevent the diffusion of water vapor and reduce the occurrence of water seepage.

5.Find a property: If the above methods do not solve the problem, you need to contact the property for maintenance.

The property will take appropriate measures according to the specific situation, or arrange for professionals to carry out repairs. It should be noted that when dealing with the problem of water seepage in the bathroom, it is necessary to keep the toilet dry to avoid affecting the maintenance effect. At the same time, if glue is used to repair the brigade, it is necessary to choose a better quality glue to avoid affecting the use effect.

1. There is a leakage at the buried water pipe joint or the exposed water pipe joint in the bathroom. In this case, for open pipes, you can check by visual observation, and for dark pipes, do a pressure test to see if there is a leakage in the water pipe.

2. The open water in the bathroom, such as showers, leaks downstairs.

3. After determining the cause of water leakage, look for leakage points, which are mainly through the observation of the top of the bathroom downstairs to find leakage points.

4. Smash open the corresponding part of the ground tile corresponding to the leakage point for maintenance.

5. Use the leak plugging spirit to deal with the leakage area and its surroundings.

6. The above method is an indicator method, which is relatively time-saving and cost-saving. After the treatment is completed, a closed water test is done to observe whether there is a leakage problem downstairs.