-
Anonymous users2024-01-24The easiest way to do this is to cut the white plastic hose from the ground and insert the hose directly into it. Your vegetable sink comes with a U-shaped anti-odor, and the white plastic pipe is redundant.
There is no need to retrofit the main pipe. 1. Leave a section of the branch pipe after the tee connecting the main pipe, and then cut it directly; 2. Insert the basin water hose directly into the inclined tee position; 3. The insertion port is sealed with glass glue. If the branch pipe is higher than the basin trap, you can remove the trap and use the hose below to make the trap function (shape).
The size and installation of the kitchen sink sink and sink sink are as follows; >>>More
This is related to the height of the interface reserved on the main sewer pipe in the main kitchen, which is generally more than 15-20cm. Because the position of the reserved joint on the main sewer pipe is too low, if the joint is damaged in the future, it is not convenient to repair (or the cost of repair will be very high and troublesome).
There is a special PVC hose adhesive, similar to toothpaste, after applying the inner wall, it is connected, and then applied around the seams. Glass glue at home can also be improvised.
First of all, it is necessary to determine the interface type, size of the vegetable basin sewer pipe, and then according to the data of the determined sewer pipe to purchase the corresponding pipe; Or you can directly ask a plumber to help with the installation.