How to vent a closed bathroom

Install an exhaust fan at the top that leads to the exhaust hole in the bathroom, the exhaust hole is on the wall of the bathroom, and look at the location. You can buy a bath bomb integrated exhaust fan.

It is best to install an exhaust fan, and pay attention to the following points when installing: 1The ventilation fan must be installed on a solid wall, at a distance from the ground.

2.THE DISTANCE BETWEEN THE VENTILATION FAN AND THE ROOF MUST BE AT LEAST 5 CM. 3.

Remember not to install the ceiling type in a place with a lot of oil smoke and dust, and to leave the high temperature source. 4.The wall type with fan can be used for ventilation in various places and can also be used for extracting fumes, and it is a multi-purpose ventilation fan.

5.Remind everyone that when using an electrical socket for power supply, the power cord of the ventilation fan should be mated to a plug that meets the safety standards. 6.

The yellow and green two-color wires in the power cord of the ventilation fan must be grounded to ensure the safety of the installation and use of the ventilation fan. 7.The power supply of the ventilation fan should be connected to the omnipolar switch as much as possible.

Add an exhaust fan and use an exhaust fan to draw.

Add an exhaust fan to the bathroom, and the air outlet of the exhaust fan is placed outside.

There are common exhaust ducts in the bathroom, and you can buy a ventilation fan or bath bomb and connect it with a soft exhaust pipe.

If there is no exhaust duct, it can only be drilled in the wall and discharged to the outside.