How suitable is the electric protector for the kitchen of the building?

Updated on Kitchen 2024-08-16
1 answers
  1. Anonymous users2024-01-24

    It is best to use a 4 square line for the line, and the current should not be less than 20-30A. A lightning refresh can solve your renovation problems for you.

Related questions
2 answers2024-08-16

Swap the leakage protection switches in the kitchen and living room. After the exchange, if the kitchen still trips when using electricity, it means that the kitchen appliances are leaking or there is a problem with the insulation of the kitchen circuit. If the kitchen electricity is no longer tripped after the exchange, it is a problem with the leakage protection switch. >>>More

3 answers2024-08-16

You first turn off all the load switches, close the switch, and then send power to the lighting, ventilation, air heating 1, air heating 2 and so on, and turn off the lights in turn after no problem, for example: turn on the lighting, and turn off the lighting switches if they don't trip. In the opening ventilation and so on! >>>More

4 answers2024-08-16

It may or may not be pushed up one day, because it will dry if it is light, but if there are pulp crumbs into it, it will not dry for a while, so it is recommended to take it apart and clean it thoroughly.

3 answers2024-08-16

The leakage protector will trip in two cases, one is leakage, and the other is that the capacity is not enough, and high-power electrical appliances are used.

3 answers2024-08-16

The lights in the two places are not lit, it must be a problem with the switch or line, check whether the air switch responsible for lighting is in place, and whether the incoming and outgoing lines of the air switch are firmly connected, I hope to adopt thank you!