-
Anonymous users2024-01-24You're doing the right thing. According to your statement, it can be judged that there is a small amount of leakage in the inlet pipe, and there is a small leakage in the waterproof part of the bathroom floor. The leakage of the inlet pipe is relatively large, but not all of it leaks downstairs, most of it will flow from the cement mortar layer under the floor tiles to the floor drain, and only a trace amount of water will drip from the waterproof damage little by little.
You are now full of saturated water in the mortar layer under the floor tiles, the main valve has been closed for 5 days, the water inlet is gone, the water leakage will be improved, the wooden strips will gradually dry out, but the water is still there, and the water will continue to drip will continue to drip so it is not surprising! It is certain that the leakage point of the water pipe is small, otherwise it can be detected by the rotation of the water meter, and the hole in the waterproof layer is also very small. What material is the inlet pipe?
After the copper pipe is used for a long time, the welding part of the copper pipe joint is prone to fine leakage. If it is indeed a leak in the inlet pipe, the situation will become more and more serious and it will not be possible to repair it on its own. It is recommended to check the location of the floor drain again:
Remove the floor drain and observe the dampness of the mortar layer between the floor tiles and the ground, and whether there is any water flowing. Then check the installation of all the triangle valves on the wall, and see if there is any slight water seepage at the inner wire joint. Hopefully it's not a leaking inlet pipe, otherwise it's going to be a big problem.
The kitchen is wrapped in an invisible place when it is renovated, and it is difficult to find. Ask if the property has a distribution map of installed water pipes, if you must get it yourself, you can use the red potion to find it slowly, if you don't need to knock on the floor and tear down the wall, you can repair it yourself, the project is relatively large, it is recommended to find a professional construction team to deal with it.
This kind of hidden problem is generally not easy to find. >>>More
When laying bricks, the waterproof layer is broken, caused by barbaric construction, knock off the tiles and redo the waterproofing.
In fact, bathroom decoration, as long as the toilet, floor drain, basin, and the pipe without leakage, you don't need to do waterproof treatment at all, because the bathroom has been waterproof when building the building, plus the floor tiles will not leak. According to the fact that the water leaks under the bath, the reason must be the floor drain, because there is no leakage under the bath, which means that the toilet, basin drainage, and pipe joints do not leak. The floor drain is not well treated, there are many leakage phenomena, and the flow direction of the water is where there are seams and there are flows.
Leave contact information to avoid it, and the solution to the problem can only be: 1. To fully confirm whether there is a leakage problem in various water pipes - sometimes, if you do something wrong with the decoration, you will hide the truth, and you will not take the initiative to admit that you are at fault. In my opinion, it is better for you to find another plumber and ask him to help do a pressure test with the pressure test pump, if he thinks there is no problem, then you should consider whether the waterproof layer is broken. >>>More