-
Anonymous users2024-01-24The installation of solid wood flooring should consider leaving expansion joints, the purpose of which is mainly to prevent the floor from being deformed or expanded by moisture and affecting the overall use. Because solid wood flooring is prone to slight expansion and contraction with changes in temperature and humidity. Therefore, when paving, the expansion joints between each floor should be reserved according to the different wood species to ensure the normal "breathing" of the floor.
In order to pursue the construction progress, some irresponsible construction personnel ignore the requirements of the gaps between the floors, so that the paved floor is likely to warp and arch.
00 expansion joints should be placed in contact with the floor and the wall, generally leaving a gap of 8 mm - 10 mm; If the floor meets the floor tiles, it is best to reserve a gap of 4 mm to 5 mm. In case of dry season, the floor expansion joints should be reserved; In the wet season, the floor expansion joints should be reserved for a smaller one; In the general season, floor expansion joints are reserved as usual. In addition, it is necessary to consider whether the solid wood floor balances the moisture and the weather conditions at the time of installation before installation, so as to be both scientific and flexible.
In order to avoid the problem of cracks between the boards and the boards after the wooden floor is installed, it is best to install spring clips at the expansion joints between the wall and the wooden floor during installation, and the number of spring clips is generally about per square meter. But many masters do not install this spring clip when installing, and the clip is not easy to buy in the market, users can buy it online, and must buy a good steel clip, so that there is good elasticity, in order to basically solve the gap between the plate and the plate in the future.
-
Anonymous users2024-01-23Regular solid wood floor installation, with 5-10 expansion gaps around and telescopic springs.
-
Anonymous users2024-01-22There should be a gap of 5-10 mm with the wall, and a gap of 50-70 filaments between the two phases of the solid wood floor.
Generally speaking, it is necessary to reserve gaps, and the plate will expand and shrink in heat. So pay attention when installing.
1. Wool floor joints.
Sports wood flooring installation is a system in which the wooden keel, as well as the rough floor joints, are left with a certain expansion joint. Generally, the joints of the keel and the seams of the wool board should leave a gap of 1-3mm. >>>More
Nowadays, many people like to put solid wood furniture in their homes, which is due to the fact that the texture of this furniture is particularly good-looking, and it will look special at home, but solid wood furniture will leave a telescopic space on the top when it is installed.
How to make gypsum board ceiling expansion joints.
Conditions for making expansion joints: expansion joints should be set at a unilateral distance of more than 12 meters from the gypsum board ceiling. The double-layer gypsum board ceiling needs to leave 10-20mm seams, the handover length is 30-50mm, and the spacing from the edge of the expansion joint to the hanging bar is not more than 300mm. >>>More
The so-called solid wood plywood wardrobe is a solid wood wardrobe from the appearance, the natural texture, feel and color of the wood are exactly the same as the solid wood wardrobe, but in fact it is a wardrobe mixed with solid wood and wood-based panels, that is, the side panel top, bottom, shelves and other parts with thin wood veneered particleboard or MDF fiberboard. Doors and drawers are made of solid wood. This process saves wood and also reduces costs. >>>More