-
Anonymous users2024-01-24First of all, you find the leakage point, and then solve the water leakage situation according to the leakage point.
Based on your description, I can't tell if it's the ground, the walls, or the top of the water.
If it's a wall, turn off the water valve and try to see if it's still leaking; If it's the top, let the upstairs try to cut off the water for a while to see if it's still leaking; If it's ground, try both of the first methods. Finally, the leakage point is comprehensively judged, and then the leakage is plugged.
Finally, according to the leakage, decide what waterproof material to use.
-
Anonymous users2024-01-23Qinglong waterproofing is a waterproof expert around you.
-
Anonymous users2024-01-22Polypropylene, just do it again to waterproof.
Why is it worse at night? At night, when there is a lot of water in the bath, it feels more like the water from the bathroom is seeping down that pipe or corner, so this happens. The best way to deal with it is to let the people above deal with the bathroom, you can use a waterproof material called Heshilong transparent waterproof glue to paint on the bathroom floor and the wall with 10cm of water to see if there is any effect. >>>More
Cause of water leakage:
The waterproof layer is divided into a horizontal waterproof layer and a vertical waterproof layer on the side, the horizontal waterproof layer leaks to the downstairs if there is a problem, and the vertical waterproof layer on the side leaks to your own home if there is a problem. Water leaking into the corner of the outside of your bathroom or the door of the bathroom is first sure that the vertical waterproof layer on the side is broken somewhere, otherwise no matter how much water can only come up from the tile surface. In fact, the damp marks we see in the corner of the bathroom or the door of the bathroom are not vertically leaked in the past, theoretically speaking, as long as the waterproof layer is damaged somewhere, the open water in the bathroom penetrates below the tile surface from the corner, tile surface and joints or any other possible place, and is concentrated in the mortar layer, then the mortar layer is equivalent to becoming a water layer, and then concentrated in the waterproof layer where the damage leaks downstairs. >>>More
First go downstairs to see, see the main location of the water seepage, and then use a sharp iron tool to beat off the cement at the water seepage position of your own house, if the place is very small, buy some ring resin AB glue to mix and make up, if the big house leakage professionals!
Absolutely. You can find Dengyu shower room, their non-standard shower room is very good. All you need to do is make a notch in the glass.
Water seepage in the bathroom, 1 is because after the waterproof layer is done, it is damaged by external factors in the later stage; 2. The waterproof layer was not done well at the beginning. Now the house is decorated after the phenomenon of water leakage again is very common, if you don't want to smash the bricks to do waterproofing, you can try the kitchen and bathroom do not smash the brick waterproofing agent, this does not need to smash the bricks, and does not affect the normal use of the bathroom, it is very convenient.