-
Anonymous users2024-01-24Buy a small piece of line, connect the yellow and red ones out of three branches, and then connect them to the top two mouths, the lower one is grounded, and the upper two are the zero line live wire, and the zero and fire can be used.
-
Anonymous users2024-01-23You'd better not mess with it, the yellow and red ones don't connect together, the new switch diagram is sent, and a few lights are said.
-
Anonymous users2024-01-22The front picture of the new switch is also sent down, and you have a switch to control several lights
The red is the live wire, the yellow and green are the ground wire, and there should be a photo that can't be seen as the zero line. Plugging into a wall socket will do.
Six wires are set aside for the purpose of increasing the use of electrical appliances on the one hand, and for backup on the other hand.
OK. Just buy a two-open switch board and ask the electrician to change it.
There are two lines that are spare.
You can see that there are two according to the line of fire, one is the zero line, and one is the bottom line. >>>More
In this case, it is very likely that the line is connected wrong, and it is recommended to find a professional electrician to check to avoid accidents! >>>More