There is no waterproof bathroom, the bathroom has been stored for 20 minutes, and the sanitation on

Updated on Bathroom 2024-08-20
5 answers
  1. Anonymous users2024-01-24

    There are two situations, first, there are fine pores in the middle of the concrete, which may lead to water seepage, and second, the temperature difference causes the water droplets that condense downstairs to absorb the moisture in the air.

  2. Anonymous users2024-01-23

    Of course, it is because it is not waterproof, and there will be problems after a long time, so it can be solved by doing a good job of waterproofing as soon as possible.

  3. Anonymous users2024-01-22

    Water seepage... Need to do waterproof...

  4. Anonymous users2024-01-21

    Are you really confused after reading it? You're talking about the situation that you're testing the waters on the spot, right? Water testing is the inspection process that must be done after doing a good job of waterproofing. Block the door and then store water, after 24 hours, if the downstairs does not leak, you can touch the mortar and tile.

  5. Anonymous users2024-01-20

    Now the buildings are used with a whole rubber roof, if the cement is up to standard, there will be no water seepage, but the general cement is not up to the standard.

    It is recommended to do waterproofing around the pipe, but if the water accumulates for a long time, there will still be water seepage.

Related questions
How to do the water storage test after the bathroom is leveled and waterproofed, please talk about t
5 answers2024-08-20

1. All bathrooms are waterproof, and the surrounding walls need to ensure that the height of the painting is not less than 80 cm; If there is a shower, the height of the waterproof paint should not be less than 200 cm when installing the shower faucet and the adjacent wall, and it is best to do the whole wall. (It is best to make the four walls of the bathroom waterproof as a whole). It's the high cost. >>>More

The bathroom has been tiled, but it has not been waterproofed, and now it is leaking, what should I
10 answers2024-08-20

Be sure to knock it off and do it again The bathroom was originally a cast-in-place board It is rigid and waterproof and should be impermeable and not leaky Now it is seepage It means that the cast-in-place board has seeped water, if you do a layer of waterproof on the surface now, it is not seepage now, in case there is a little damage in the future, it will seep water, it is recommended that you knock it off to the cast-in-place board, and after cleaning it up, make a layer of waterproof layer with thickness and quality on the cast-in-place board Then rest assured.

The bathroom waterproofing has not been done, and the tiles have been pasted and there is no waterpr
6 answers2024-08-20

There is a water repellent that does. In the past, I have seen that the condensate imported from the United States is easy to use, and now I don't know where to sell it, you can go to the building materials market to see, and there may be such products imported from South Korea.

The bathroom is not waterproof, and the bathroom is made into the wall-type wardrobe, how to make it
8 answers2024-08-20

It is recommended to paint the entire wall on the back of the wardrobe with cement-based waterproof paint twice to prevent water leakage and moisture in the bathroom. However, to be on the safe side, it is better to waterproof the bathroom as well.

How to make the toilet waterproofThe construction process of waterproofing the toilet
1 answers2024-08-20

Toilet waterproofing practices:

1. Ground treatment. >>>More