-
Anonymous users2024-01-24Simple description The production process is: first use the wooden keel to make the frame structure, the ceiling wooden keel should be coated with fireproof coating, and the hanging ribs are made on the main keel. The stepped ceiling is made of blockboards and wooden strips.
After the wooden keel is done, the gypsum board on the paper surface, the gypsum board and the keel must be connected with self-tapping screws, and the screw head must enter the board surface about 2mm, and it is strictly forbidden to use gun nails.
Drill the hole first, put the casing in, insert the nail in, knock it, and don't loosen it.
Use a hand hammer with an electric drill.
If the ground is solid and smooth, it may be glued with glass glue.
It is best to reinstall the toilet, find the correct position, and after installation, put sealant along the edge of the toilet, and dry it for 24 before it can be used.
You can only shovel off the original sealant and apply new glue. When buying glue, choose a special antibacterial one for the bathroom, prepare some washing spirit when gluing, wipe it on your fingers, and smooth the glue without sticking to your hands, and it looks good. Wipe the ground dry before gluing, do not use the toilet for 48 hours after gluing, and wait for the glue and the ground to stick and firm before use, otherwise the stickiness of the glue will be reduced by soaking the water.