-
Anonymous users2024-01-24Change another one, remember to take a few photos when you go to buy, go to the hardware store, save waiting, will say no, have a photo to him, he will know what model it is, by the way, ask people how to install it, it's actually very simple.
-
Anonymous users2024-01-23If the toilet inlet valve is broken, just change a set of tank accessories, and the price is very cheap.
-
Anonymous users2024-01-22On the Internet, just buy a set of water valves and install them! The inlet valve is cheap!
This water belongs to the general type, from the description to know the situation, look for a small plastic plaque in the water tank to see if there is a small plastic plaque, that is a positioning pin, if there is no can make one, the maintenance method is, move the jacket of the water valve down to the appropriate position, rotate the jacket to (left or right) a little, stretch it up by hand when it does not move, insert the small positioning pin from the bottom of the jacket along the groove of the inner rod in the middle of the two tubes, this is the general maintenance procedure, see if it is feasible, I wish you a smooth and successful operation. The dowel pin is the lock referred to in the figure.
Repair it yourself, ask the property to repair it, and ask a professional to repair it. >>>More
No matter what kind of inlet valve it is, its principle is the same. The inlet valves are all floating, some are round and some are square. When the water reaches the water level, the water floats, and then the water drifts to drive the thimble and the leather gasket to seal to stop the water ingress. >>>More
<> the inlet valve is broken, it is generally replaced with a good one. The picture comes from the 100 bureau buried pictures, and You Zhao is for the Shenla rental test.
The float in the tank drives the water inlet valve of the water tank, when the float floats up and the valve is not closed, and the water continues to enter, it must be a problem with the valve, so you have to check the valve, whether the link between the float and the valve is loose, or the valve is broken, and then it is easy to deal with; >>>More