-
It's not a big problem to see how the supervisor is.
Anyway, it's a hidden project, and others can't see it.
Besides, there are few standardized constructions now.
It's really all standardized, and they all won the Luban Prize.
In addition, when it is used, it should also be standardized, and the use should not be changed without authorization.
-
The impact is there, and the construction must be carried out according to the specifications.
-
The impact is definitely there. It shouldn't be a big problem.
Please don't worry.
Attached lifting scaffolding and cantilever outer frame with a height of more than 20 meters belong to sub-projects with greater risk of more than a certain scale, and a special safety construction plan must be prepared before erection, which is approved by the expert group. During the demonstration, it is necessary to review whether the nodes supported on the structure have been reviewed by the original design unit or have been strengthened in advance; >>>More
Ratio of external overhang to pressed wall:
If the beam is located on the roof, then: 1:2 >>>More
The anchorage degree should be sufficient, and the floor should be doubled balcony degree, and the masonry structure cantilever beam end degree.
Yes, but in summer, the basket leaves should not come into contact with the metal, because the temperature of the metal is very high, which will burn the basket leaves.
If the balcony rests on the cantilever beam, the side beam should be set on the outside of the balcony board, and the balcony board transmits the force according to the two-way plate, and part of it is directly transmitted to the cantilever beam, and part is transmitted to the side beam, and then the side beam is transmitted to the cantilever beam. The reinforcement of the balcony slab should also be reinforced in the way of the cantilever slab, that is, the steel bar at the top of the slab should be set up along the length and appropriately strengthened.