-
Anonymous users2024-01-24Listen to your story: it is indeed like a water pressure problem, there is no good way, no, you add a "circulating pump" should be able to solve it.
For example, if the water is 5 kg of pressure and has been decomposed, it is average, and it is also related to the length of the pipeline. ）
-
Anonymous users2024-01-23If the water pressure is low or the pipe is thin, install a household pipe pump in the water heater.
-
Anonymous users2024-01-22It's a problem with low water pressure... If you want to solve it, it is recommended that you buy a pipeline pressurized pump and install it at the main pipe of the water inlet, OK
-
Anonymous users2024-01-21It's best to find a plumber to help you take a look.
1.Set the temperature lower;
2.Boil cold water to a larger extent; >>>More
Gas water heaters that can't catch fire can be divided into no ignition sound and no ignition and no ignition sound when there is a little fire. >>>More
First of all, I have to remind you that this question has nothing to do with the brand. >>>More
The machine is defective:
It's that the water flow starter of your water heater is too sensitive. If the water pressure in your home changes slightly (such as when the bathroom is flushed, when the kitchen cold water faucet is turned on and off, etc.), the backflush water pressure generated in the water pipe will impact the water flow of the water heater to start the sensing device, and the water flow start sensing device will generate an instantaneous start signal to the main controller, and the machine will start automatically. >>>More
Generally speaking, the smoke pipe temperature of a gas water heater is around 150. If the space of the ceiling is slightly larger, it will not cause a fire due to heat accumulation. However, if it is too close to the plastic gusset, it is very likely that the gusset will be discolored and deformed. >>>More