-
Anonymous users2024-01-24First of all, confirm that the drawn line is in the XY plane coordinates, around the Z axis to rotate 45 ° straight line, it is easy for you to draw, the next step you want to turn the line 45 °, you should determine whether to X as the axis or Y as the axis to rotate 45 °, with X as the axis to rotate 45 °, the straight line in the XY plane coordinates, the straight line in the Y direction is shortened; With the Y axis rotated at 45°, the straight line is seen in the XY plane coordinates, and the straight line in the X direction is shortened.
-
Anonymous users2024-01-23The slope of the three-view representation is OK.
Nail two nails, put a rope sleeve (to be a live buckle) on both nails, and tie a pencil to the rope. Place the pencil on the farthest point of the ellipse you want to draw, tie the noose to the dead, straighten the noose and start drawing. Two points determine an ellipse. >>>More
First, enlarge the sample, and then make the ceiling keel frame in the ground grouping according to the large sample, and then assemble it on the top surface. I hope my answer can help you.
Hand drawn.
Carpentry lotus ceiling installation method. >>>More
There should be such a picture on the Internet, or you can use 3D drawing software to draw one yourself according to the washing machine.
If the amount of work is large, you need to use an air nail gun, and if you have a small amount, you need to stick it directly with plaster and glue. It is recommended to find a professional master to get it, and it is not easy to have problems.