Ladies and gentlemen, what should I do if there is water in the kitchen wall socket

Updated on Kitchen 2024-08-04
4 answers
  1. Anonymous users2024-01-24

    After the socket on the wall is flooded, it will cause the socket to be short-circuited, and if there is a leakage protector, the leakage protector will trip and automatically cut off the power supply; If there is no leakage protector, a fire may occur in the case of a short circuit for a long time. It is recommended to cut off the power supply after the water has entered.

  2. Anonymous users2024-01-23

    Was it short-circuited? If there is no short circuit, you will go to the brake to cut off the power first.

  3. Anonymous users2024-01-22

    After the power is off, take a wipe or take a hair dryer to blow it, remember that it is after the power is completely off.

  4. Anonymous users2024-01-21

    If the water is in, then let it dry

Related questions
1 answers2024-08-04

It's strange to be able to send it, the socket is short-circuited, you still send the gate, it's too unsafe, turn off the main gate, and then disassemble the kitchen socket, wipe the water inside, and wait for the inside to be completely dry, and then send the gate.

1 answers2024-08-04

1. The top surface and wall of the kitchen should be made of fireproof, heat-resistant, and easy-to-clean materials, such as glazed tile walls, aluminum ceilings, etc. The ceiling of the kitchen should consider the use of waterproof products, that is, waterproof gypsum board, water-resistant putty and waterproof latex paint with high liquid deficiency, so as to be beautiful at the same time, so as not to cause inconvenience in use. >>>More

3 answers2024-08-04

Go to the empty box to see if there is a leakage protector tripped, replace the broken socket, and then push the leakage protector up. The kitchen and your study are connected to the same leakage protector. So the other circuits have electricity.

3 answers2024-08-04

Flush down the bucket with a toilet plug or with water.

1 answers2024-08-04

At the end of each socket, the live wire is led out, the neutral wire, and the ground wire remain unchanged.