As soon as the toilet is used upstairs, water is dripping down, how to judge where the problem is

Updated on Toilet 2024-08-13
2 answers
  1. Anonymous users2024-01-24

    The bathroom is a space that we can not ignore in our home, and there are a lot of things that need to be paid attention to, especially the problem of drainage, we can not ignore it, the leakage of the bathroom generally appears in the floor drain, the corner of the wall, and the three places near the pipe, so we must pay attention to it when doing waterproofing.

    1. The floor of the bathroom should be leveled first. If you are going to replace the floor tiles in the bathroom, after chiseling the original floor tiles, be sure to level the floor with cement mortar before waterproofing. This avoids leakage of the waterproofing coating due to uneven thickness.

    2. The seams should be painted in place. The joints between the walls and floors of the bathroom and the joints between the water and water pipes and the floor are the most problematic areas. In the construction, you must urge the workers to deal with these corners and corners, and all waterproof coatings must be applied "in place".

    3. Wall treatment is also very important. In the general bathroom waterproofing treatment, the wall should also be made about 30 cm high waterproof paint to prevent water from penetrating the wall. However, if the wall of the bathroom is a non-load-bearing light wall, the entire wall should be coated with waterproof paint.

    If you have a two-fan shower screen in your home, the two walls that are connected to each other should also be fully painted. If you use a bathtub in your home, the wall adjacent to the bathtub should also have a higher height of the waterproof paint than the top edge of the bathtub.

    4. The waterproof test must be done. After the construction of the bathroom is completed, all the water in the bathroom is blocked, and a 25 cm high "barrier" is built at the door, and then 20 cm high water is poured into the bathroom. After 24 hours, you will check the surrounding walls and floors for leaks.

    This 24-hour waterproof experiment is the key to ensuring the quality of the waterproof project in the bathroom.

    5. Keep the water smooth. All sewer pipes in the bathroom, including floor drains, sewer pipes for sanitary ware, etc., should be kept unobstructed. Only in this way can we fundamentally avoid the tragedy of the "flooding of the Seventh Army."

  2. Anonymous users2024-01-23

    You have to disassemble the ceiling of your home to figure out the problem, in order to deal with the symptoms, as long as you open a small 30*30 cm inspection opening on the ceiling of your home, it is easy to see the problem.

Related questions
1 answers2024-08-13

When the weather is sunny (the screw rod is dry), the contact position between the screw rod and the roof is sealed with glass glue. If the screw can be removed, the screw should be reloaded after buttering and wrapping the hemp silk.

1 answers2024-08-13

Clean up the dirt inside, buy a little plugging spirit (waterproof materials are available for sale), and plug it.

2 answers2024-08-13

Did it leak downstairs? You can remove the ceiling downstairs and wipe the perimeter of the toilet sewer pipe with a plugging agent.

5 answers2024-08-13

Between the concrete and PVC pipes on the ground of your house, there is a gap due to vibration when you hit the ground, and the water of the toilet runs down the gap when you use the toilet, and there is water downstairs in the dusty wheel. >>>More

5 answers2024-08-13

Downstairs grates are possible, and many residents living upstairs will install their own sewers outside. If you are renting and the landlord doesn't care, see if you can move. Because after all, rebate is a very uncomfortable thing.