Is it better to make solid wood particle board or solid wood plywood?

Solid wood plywood is good.

Solid wood plywood is made of wood layers, and the blockboard is made of glued-laminated veneer on both sides and glued together wood boards.

Solid wood plywood is used for furniture cabinet production, because in fact, the overall texture of the wood structure is more beautiful, and because the system structure is easy to deform, it is deeply loved by a wide range of decoration users.

Stability: The unidirectional nature of the wood fiber of the wood slag floor and the different ages of the wood at the core and the edge of the tree cause the wood density of the board to be different, so the thermal expansion coefficient of the board is different and easy to deform. It is easy to crack in the case of dehydration.

Wear-resistant: The national standard for the wear-resistant items of multi-layer solid wood flooring is that the quality of wear worn when 100 rpm is rotated under a positive pressure of 500 Newtons is not greater than milligrams.

The so-called solid wood particle board is actually a board produced by the process of particleboard, which is a kind of particleboard and belongs to homogeneous particleboard.

The scientific name of homogeneous particleboard is directional structure particleboard, which is a kind of wood-based board with small diameter wood, thinned timber, wood core, bark, branch wood, etc. as raw materials processed by special equipment to grow 40mm, 70mm, width 5mm, 20mm, thick, and a kind of wood-based board after drying, sizing and special equipment will be criss-cross and directional paving of the surface core layer planer, and then a kind of wood-based panel after hot pressing. After the flakes are dried by the advanced single-channel dryer, the expansion coefficient is small, the moisture-proof performance is very good, and the flakes are paved in a directional layer, so its internal internal texture is uniform, and the nail holding force, bending resistance and stability are stronger than that of ordinary particleboard and powdered MDF.

As a high-grade and environmentally friendly substrate, OSB has been widely used by furniture manufacturers in Europe and the United States, and the domestic high-end panel furniture market has also begun to adopt this kind of board in a large area.

The solid wood particle board was very slow to close much higher, but in terms of board performance, it is still more suitable for the scrambler of the state inspection cabinet, because green moisture-proof particles can be added to it, the moisture-proof performance is very good, and the composite board is relatively stable compared to the particle board, but you also have to check the quality and environmental protection, and there is mainly a problem of edge sealing.

Solid wood particle board and solid wood plywood are common boards, each board has its own characteristics, and the specific choice of which material should be considered according to the use environment and use.

Solid wood particle board, as the name suggests, is composed of solid wood particles, which are processed by high temperature, high pressure and other processes. The advantages are that the density is large, water-resistant, wear-resistant, corrosion-resistant, with good mechanical properties, and more durable.

Solid wood composite board is made of multi-layer solid wood boards, and the direction of each layer of wood boards is different, which has good stability and strength, and is not easy to deform and crack. At the same time, the surface of the solid wood plywood is pasted with high-quality wood veneer, which has good aesthetics and simulation.

The choice of solid wood particle board or solid wood plywood depends on the needs of the user, if it needs to be used in a place with a humid environment or a place with greater constraints, it is recommended to choose solid wood particle board; If you pay attention to the aesthetics of the board calling bridge, you need a board with high surface imitation and high fidelity and stable material, it is recommended to choose solid wood plywood.

Therefore, when choosing a plate, you need to consider it comprehensively according to your own needs, and consult relevant professionals or manufacturers in order to choose the material that best meets your actual needs.

Solid wood particle board and solid wood plywood are both common wood-based panel materials, which have their own advantages and disadvantages, and are suitable for different application scenarios.

Solid wood particle board is a kind of board with high hardness, high density, good stability and strong wear resistance, which is usually used as a surface material for furniture, and can also be used for floors and walls in interior decoration. The advantage of this material is that it has a good texture, can simulate the feeling of solid wood, is also cheaper than solid wood materials, and can reduce the consumption of forest resources. The disadvantage is that there may be harmful substances such as glue and formaldehyde, so it is necessary to pay attention to choosing brands and manufacturers with environmental protection rental certification.

Solid wood composite board is a more stable material with a more stable structure, which is composed of multiple layers of solid wood sheets in different directions staggered stacking, which can effectively reduce the deformation and cracking problems of wood when it naturally dries and shrinks and expands wet, and also has the beauty and texture of solid wood materials. This material is often used in interior decoration such as high-end furniture, flooring, doors, etc. The downside is the higher price.

Therefore, solid wood particle board and solid wood plywood have their own advantages and disadvantages, and the choice of which material should be weighed according to the specific use needs and budget. At the same time, it is necessary to pay attention to the selection of environmentally certified brands and manufacturers to ensure that there is no harm to human health during use. The above is for Hu Chun's reference only.