-
Anonymous users2024-01-24I think you can use glass glue or construction glue, the most important thing is that your preparation work should be done, the first thing is to glue the corner of the wall to dry, there can be no moisture, and then you can use sandpaper to beat it, so that it can be more sticky. You can choose the kind of wall curtain glue for construction glue, and the color is also white and black, so choose a little better.
-
Anonymous users2024-01-23The glue will also fall off, use white cement to see.
-
Anonymous users2024-01-22The following is for reference only, and I think it is okay to use glass to scatter the royal glue or construction glue to punch the rock, the most important thing is that your preparation work should be done, the first thing is to glue the corner of the wall to dry, there can be no moisture, and then you can use sandpaper to beat it, so that it can be more sticky. You can choose the kind of wall curtain glue for the construction glue, and the color is also white and black.
Use transparent glue, if it is used in the bathroom that doubles as a bathhouse. Long-term heating will degum, my home is tile sewing paint, often take a bath, did not find the situation of falling off. FYI.
You can do without. At the water inlet, put the connecting rubber plug into the water inlet hole of the squatting toilet and snap it tightly. Coat a layer of glass glue or putty on the outer edge of the contact with the water inlet hole of the squatting toilet, insert the water inlet pipe into the water inlet hole of the rubber plug to make it well sealed with the rubber plug to prevent water leakage, coat the edge of the water outlet of the squatting toilet with a collapsing layer of glass glue or putty, put it into the inlet of the sewer pipe and screw it, and set the toilet horizontally with coke slag or other fillers. >>>More
Of course not, the bathroom is generally pasted with tiles, the tile itself has a certain waterproofness, the drainage surface is done, it is generally from the gap seepage into the water, if the original waterproofing, maybe a small area of local water seepage, in the tile joint first poured cement self-leveling, and then use the beauty of the nest real porcelain beauty glue to fill the gap, this product has the function of waterproof and beautiful seam, the color can be selected according to the color of the tile, if the practice of reinsurance does not smash the brick, you can use the ceiling downstairs again The shield back surface special impermeable slurry to do back water surface plugging, the specific implementation of experienced professionals will be more safe, after all, it is a technical job. The curing time of glass glue is 24 hours, if it is continuous water leakage, glass glue will not work; If you can turn off the water source and keep the glue dry for 24 hours, the glass glue can still plug the leak. >>>More
Scrape off the original deteriorated porcelain white glue, clean the joints, and then fill the joints with white sewing agent. I hope my answer can help you.
There is a leaking water pipe or a leaking sewer pipe in the wall, more information, better suggestions, free professional technical consultation for concrete waterproof leakage repair, eliminating the need to repair today and leak tomorrow; Repair every year, the trouble of leaking every year.