How to connect the living room floor and kitchen floor tiles

You can use marble, and you have to seal it well, otherwise it will be difficult to take care of and it will be troublesome to clean up. In addition, there is a special kind of imitation wood floor tiles in the kitchen, which is very beautiful, and it looks really similar to the wooden floor, but the price is really expensive, and I almost wanted to buy this kind of imitation wood floor tiles. For more information, please visit ToGo.

Since there is a difference in the floor, the living room tiles are paved first (the tile is left at the edge of 10CM), and then the floor is paved, and finally the "7" shape marble (the marble factory has customized) veneer (the floor surface should be pressed above the floor - leave 1-2MM), which not only solves the maintenance of the edge of the tile on the floor of the dining room, but also solves the interface problem between the floor and the drop surface.

1. You can use a door slab stone, or you can use a brick of a third color;

2. The door stone should be used, that is, marble, in order to be basically waterproof, in fact, if the kitchen is fine, there is no need, and now many people are still popular in the living room and kitchen to use the structure of integrated bricks;

3. Close the junction between the floor tiles and the floor of the living room, of course, the floor tiles are paved first, and the floor is more convenient to cut and pave according to the floor tiles. Generally speaking, the junction between the floor tiles and the floor of the living room is best to be made of a floor, that is, the floor is more than 15 mm higher than the floor tiles, so that it is easy to install decorative strips at the junction of the floor tiles and the floor, and there is also a sense of hierarchy. If the design requires a uniform elevation of the ground, it is not a big deal, as long as the level is done in advance, the floor tile and floor height are calculated separately to ensure that the floor tile and floor are on the same level.

Whether it is marble or floor, the connection between the tile and the wood floor can only be closed with L-shaped or T-shaped beads, and the grade of the material is determined by your own choice.

Looking at the picture, I can't be sure that it is absolutely flat, and if it is, only the metal T-shaped floor strip can solve it. This treatment process has drawbacks, unless it is a purely air-conditioned room, without any underground heating facilities, otherwise the embedded parts of the T-bar can not be fixed or fixed firmly (if it is a winter heating period construction, there is no problem).

When daily maintenance and cleaning of the floor, try not to see obvious water as much as possible, and hold the mop or rag tightly with your hands to prevent water dripping. Otherwise, the floor absorbs moisture and expands, and the T-bar will not be able to hold down the floor tiles.