What should I do if the kitchen tile cracks?

The cracked and damaged tiles can not be repaired, and can only be replaced, and the specific replacement methods are as follows: 1. Scrape off the caulk at the joints between the tiles that need to be replaced and the surrounding tiles; 2. Use a marble machine to cut along the diagonal line of the tile, pay attention not to the four corners of the tile, and the distance from the corner is about 10 cm; 3. Use a hammer to smash it from the center of the diagonal line and remove the broken tile in the center; 4. Use a hammer and a crowbar to start from the edge of the crushing center, the crowbar is appropriately tilted outward to stand on the brick surface, hammer the crowbar with a hammer, and gradually knock the tiles from the center to the surrounding areas, and be particularly careful to the side of the tile. 5. Clean up the wall and ground base after smashing off the tiles, and remove the loose base layer; 6. Use cement mortar to re-paste new tiles.

In the process of using the above methods for processing, the following problems need to be noted: 1. If there are buried water, electricity and heating pipelines on the wall and ground, the buried area of the pipeline should be avoided when cutting with a marble machine, and the cutting depth should be noted; 2. For the base layer of the wall and ground with waterproof needs, before smashing the tiles and re-paving the new bricks, it is necessary to use waterproof materials such as plugging spirit for the base layer to do waterproof treatment.

1.Some small cracks on the tile generally do not affect the use, so in order not to blacken these cracks, become ugly, we need to deal with the cracks as soon as possible, and buy a professional tile grout to add the joint, which is troublesome and wasteful, and the use of glass glue to add the seam is too technical.

2.In fact, you can use toothpaste to repair these cracks, gently squeeze out some toothpaste, and use your fingers to evenly apply the toothpaste to the cracks.

3.Gently wipe off any excess toothpaste around you with a cloth or paper towel.

4.When it dries, the tiled walls look like new. If the tiles are colored, buy toothpaste of the corresponding color, or mix gouache paint in white toothpaste, and the effect of applying the gaps in the tiles is just as good.

Cracks and scratches on the surface of the tile can also be repaired with white toothpaste, and the scratches on the surface of the tile will disappear after applying it a few more times.

Find a special master to maintain it, if you don't know how to do it casually, I'm afraid it will affect the surrounding tiles.

This is the deformation of the tile caused by the heating of the flue. Just use ordinary porcelain white glass glue on it, remember to use glass glue, weather-resistant glue, sealant effect is not very good, before gluing must scrape the ash in the cracks, so that the glass glue is all into it.

Now there is a product called kitchen and bathroom porcelain seam treasure, Apple Tree brand, which is specially designed to deal with the tile gaps in the kitchen and bathroom, and the effect is very good.

There are many reasons for the cracking of floor tiles, such as installation environment, materials, processes, temperature, etc., 1. Wall deformation.

After the renovation of the wall, there will be a phenomenon such as wall sinking or deformation after a long time, which will cause the wall tiles to crack, and the transformed wall can not be paved with tiles immediately.

2. Regular linear cracking.

caused by ground subsidence.

3. Cracking of cut and processed bricks.

Dark crack is caused during cutting, and after a long time, it is affected by cement shrinkage and external stress and other factors. It is recommended that the tile cutting should be cut with professional water cutting.

4. The cement used in laying is inferior cement, so that the ground base fails to produce strong viscosity to the brick, resulting in cracks in the process of thermal expansion and contraction.

5. The floor tiles are paved with joints, the size of the joints is not properly treated (generally 2mm), the expansion and contraction of the base layer is larger than that of the tiles, and the cracking caused by expansion.

6. The immersion before the floor tile is not enough, after the paving, the floor tile expands after absorbing water, which will also cause cracking, which mostly appears in the wet paving process.

You can fill it with white glass glue. The glass glue has a good tensile filling effect, and by the way, apply the side joints of this brick to prevent cracking the adjacent wall tiles.

Generally, cracking recaptures the place where the porcelain tiles are paved, and there are generally the following situations: 1Most of them are cracks caused by inappropriate cement ratio; 2.

The substrate is not cleaned, resulting in cracking caused by the hollowing of the wall; 3.The moisture of the cement is quickly absorbed by the wall, resulting in the thermal expansion of the cement too quickly and the opening or hollowing of the drum falls off; 4.The surface tiles of the wall are cracked due to the settlement of the staircase or the change of the wall itself; 5.

The tile body is soft or hard, and the glaze is thin. Cracking caused by rapid absorption of moisture with cement and then expansion; Note: Generally, ceramic tiles are finished or semi-finished products, and they will not crack without external influence.