-
Anonymous users2024-01-24After the repair, test the water without leakage, and then lay the bricks, when paving, the cement is enough! First dry pave a layer of 1:2 cement sand, stirring the water can not be put too much, see the material wet on the line, and then smear a layer of pure cement slurry behind the soaked bricks, pave on the line, after paving, try to use it after a few days!
-
Anonymous users2024-01-23That is probably a problem with waterproofing.
You'd better not do it yourself, do waterproof first, and do a 24-hour water storage test after doing it. Confirm that there is no leakage, do a protective layer, paste tiles, and then do a 24-hour water storage test, no leakage. In practice, ordinary workers will not do it so carefully, but it is still recommended that you find a professional to do it!
-
Anonymous users2024-01-22If you really dig it, it is recommended to dig all of them and redo the waterproofing The proportion problem depends on the waterproof material If you just stick the bricks, you generally do not use sand The specific situation can be consulted separately Thank you.
You have to be non-slip, the kitchen and bathroom are bright, the bedroom and living room depend on what you like, but the general floor tiles are still based on light tones, I personally like the jade texture of the full glazed bricks, don't be too flowery, to spontaneously combust the feeling, my home is, it feels good. If the house is big, it will be fine to spend a little.
According to the specific situation of the bathroom and the severity of the leakage to determine the number of pry bricks, it is recommended to find a professional construction team, and find out the drawings of the bathroom decoration, convenient and efficient construction.
First of all, you need to determine what is the cause of the leakage of the floor in your bathroom, 1. Find a professional plumber to check whether the pipe is ruptured and the water leakage is caused by the leakage, if it is a pipe problem, you need to repair the pipe in time to solve the leakage problem; >>>More
The bathroom floor tiles are pasted, but what to do if the water leaks, there is no other way but to remove the floor tiles and redo the waterproofing. That's all there is to it.
Yes, it will raise the floor, and you have to consider the difference in the height of the floor in the final hall. Generally, hairing, and then interface agent, you can apply tiles.