-
Anonymous users2024-01-24Buy a TP-Link 150M of dozens of pieces can be,The first route (must be determined to be a normal route "not" cat) regular settings,The second route:
1. The first router, the LAN port, the network cable, the WAN port, the second router, the LAN network cable, the wireless computer.
2. Select "Dynamic IP" for Internet access
3. General settings such as SSID, password, encryption mode, etc.
4. Change the IP of the LAN port to be different from the previous router.
-
Anonymous users2024-01-23Suggest it, try it twice for yourself and try it out.
1.If you're connecting for the first time, find the name of your wireless router, set the IP address to get automatically, and you'll be able to connect directly.
2.If you have already set this password, you need to know the wireless name and password, and if the router has DHCP turned on, enter the wireless name and password to log in.
3.If you have set a fixed address, you need to set your own IP and enter your wireless name and password to log in.
4.If you have previously set up but later forgot your wireless name and password, it is recommended that you reset your router and then follow 1 to log in.
If you see so many ifs above, you will know that if you don't explain your situation clearly, there is no way for others to help you.
-
Anonymous users2024-01-22Did you buy a router now?
If you buy it, you can Q38208683 it
Let's teach you slowly.
-
Anonymous users2024-01-211. Check whether the routing network connection in your living room is normal.
2. Configure IP, subnet mask, gateway, DNS for the wireless router, and set other encryption by yourself.
IP: Subnet Mask:
Default Gateway: DNS:
3. Connect the WAN port of the wireless router to the LAN port of the router in your living room.
-
Anonymous users2024-01-20Replacing the original router with a wireless router is simple and stable.
-
Anonymous users2024-01-19Probably speaking, I don't know if I can help you:
Connect an external network cable (some of which are also connected via a cat) to the router, and then tap the router to the computer you want to connect to.
If it is wired, it does not need to be set, and if it is wireless, it needs to be set. Knock on your router IP in the browser (, make some encryption settings in it, and remember the password on the notebook, sometimes you need to reset it.
-
Anonymous users2024-01-18TPLink WR740
There is it in the manual when you buy it, probably first wiring, and then enter the settings page, (it is best to change the previous routing IP first) and set it up according to the prompts. Once you're set up, you're ready to go.
-
Anonymous users2024-01-17Give me a portion first.
Find a reason to call 10000, say that your network is not good to use, let them come to the staff, come, tell him, when you first installed, it was said to be installed in the living room, but at that time, I didn't find a suitable line in the bedroom, this time let him check whether your bedroom has a line that can be used, if there is, he will soon give you a jumper, you can use it normally. If not, he'll figure it out for you. Again, if you are a wireless router, you don't need to move to the bedroom, use it like a laptop, and if it is a desktop, the network cable is a little longer at most. >>>More
1. Change the router with three antennas.
Second, in the room between the living room and the bedroom, add a router to set up the bridge. >>>More
1 The power of some routers is adjustable, make sure you adjust it to the maximum. >>>More
Whether the router is set up or not, change to a new router, and reset the router dial-up Internet account.
The general home router can be divided into four... One incoming line, four outgoing lines... If it is wireless, it can connect more than 200 wireless devices, mobile phones, laptops, tablets, etc.