Can oxalic acid clean toilets

Many families are really powerless in the face of the smell and dirt of the toilet, but some people try to clean the toilet with oxalic acid, in factIf the dirt in the bathroom is severe, you can use it once in a while, but not too often, as it will corrode the toilet. Like some of the toilet cleaners we usually use, it is a weak acid In the cleaning process, it will not cause great harm to the human body, but like oxalic acid, its pH value is very high, it is a strong acid, although it has an obvious effect on removing the dirt in the toilet, but there will also be a strong pungent smell, which is very harmful to people, and like oxalic acid, its main component is mainly industrial hydrochloric acid, and the liquid is basically yellow-green, in addition to strong irritation in the air, it will also produce chemical reactions, producing a large number of irritating smoke. Therefore, it is best to clean it with detergent, and if there is a lot of dirt, you can use a disposable method, that is, oxalic acid to clean it.

Ask how to clean the stains on the marble outdoor floor.

Answer 1: Dust cleaning: If it is dust on the marble floor, it should be cleaned regularly and wiped with a professional vacuum cleaner; 2. Special stains: If it is colored stains such as ink and juice, you can gently pat and press the stain with a wet towel first, and then wipe it off with a clean towel after the color is absorbed; 3. Stains that are difficult to clean:

A strong concentrated cleaning agent for marble can be used to effectively remove organic contamination.

Question: How to deal with water stains on the surface of the stone.

This method mainly uses the action of high temperature and high heat to precipitate the water in the alkali-silica gel to make it into a solid colloid, and then uses stone curing agent for waterproof treatment. Since this method only treats the surface part of the stone, when the alkali-silicone body becomes solid, it will immediately absorb water from the bottom of the stone and its surroundings, and re-form water spots. Commonly used appliances are sunlamps or flamethrowers.

2. Chemical cleaning method.

This method is mainly to use the stone water spot remover to clean, remove or destroy the alkali or alkali-silicate gel (C-S-H) that forms water spots in the stone, so that it loses its moisture absorption ability, so as to achieve the purpose of treating water spots.

3. Comprehensive method of cleaning and baking.

The stone water spot remover is used to remove or destroy the alkali-silicic acid gel (C-S-H) that forms water spots in the stone, and then the water in the stone is dried by baking.

4. Brightening and toning method.

The color enhancement method is to use the method of color enhancement to deepen the color of the lighter part of the stone with water spot lesions, so that it can achieve the same or close color as the dark part of the stone, so as to achieve a beautiful decorative effect. Brightening and coloring method is divided into protective brightening and coloring method and ordinary coloring method, protection and coloring method in adjusting the color of the stone at the same time, the stone also plays a protective role, the ordinary coloring method only adjusts the color of the stone, does not play a protective role.

If the dirt is not heavy, oxalic acid can remove the dirt from the toilet pipe, if the dirt is heavy, you need to use the toilet cleaner to clean the dirt in the toilet pipe. Oxalic acid can be used to remove dirt. However, be careful when using, oxalic acid has a strong corrosive effect on the glaze of the toilet, so it must be diluted before being used to wash the toilet.

High concentrations of oxalic acid also tend to corrode hands.

Oxalic acid can corrode toilets, but this corrosion is very slow. Because toilets are generally made of ceramic or synthetic materials, they have certain corrosion resistance to oxalic acid. At the same time, 84 disinfectant can also be used to clean the toilet, which will also have a good effect.

Oxalic acid can be used to clean the toilet, but it must be put in an appropriate amount and not for too long, so that it will not corrode the toilet

Oxalic acid can wash toilets, and the pH value of oxalic acid is quite high, so it has an obvious effect on cleaning dirt and other substances.

1) Main ingredient: industrial hydrochloric acid.

2) Characteristics: The liquid is yellow-green, and the concentrated acid will emit white smoke when placed in the air, and has a strong pungent odor.

Advantages: If you don't want to put effort into cleaning the toilet, in order to clean the dirt, you can directly use strong acid to clean the dirt.

Disadvantages: Corrosive, oxalic acid and dirt in the toilet come into contact with a chemical reaction, producing a large amount of irritating fumes.

Oxalic acid can effectively remove toilet stains, make your toilet bowl very clean, and will not corrode the toilet, but the smell is a little pungent, as long as it is ventilated more.

It can be used temporarily, but it needs to be diluted and used, and it will corrode the walls and floors of the toilet after a long period of use.

Yes, because it is acidic, and the hardened things in the toilet are generally calcified, and then brush it with something, and it will be cleaned up.