My toilet is the kind of toilet with a rope that flushes when you press it, and what should I do if

Updated on Toilet 2024-08-03
2 answers
  1. Anonymous users2024-01-24

    Ask someone to repair or replace it.

  2. Anonymous users2024-01-23

    Open the lid of the water tank and be careful with the rope chain. See where the levers and valves are stuck.

Related questions
4 answers2024-08-03

Hehe, look for a property and see if they have a way to stop cooking tonight.

3 answers2024-08-03

The toilet bowl is made of plastic or rubber, which will age, deform, and damage over time, which is the most common problem of the toilet. At this time, it is necessary to replace the water blockage bowl. First, saving water is the duty of every citizen, and it has nothing to do with money, and second, it can also remove the noise caused by running water.

2 answers2024-08-03

The exhaust fan is leaking, it's time to replace it. Damp.

1 answers2024-08-03

The vast majority of check valves are spring-sung, but the springs are usually soft and the flow resistance is negligible. Normally, check valves with opening pressures above MPa will be marked with a spring on the hydraulic schematic. Some large-bore check valves do not have springs, and the steel balls rely on gravity to return, and these valves often require vertical installation. >>>More

6 answers2024-08-03

When flushing, the water must be ventilated into the sewage pipe, that is, one in and one out, but when flushing, the air only enters and does not come out, which will cause the water to flow very slowly in the seat, either the air hole of the sewage pipe on the floor is blocked, or the master has changed the underground sewage pipe when making the pipe. >>>More