I m doing a survey about some situations or problems in the use of the toilet, the user

1.Water leakage is a technical problem of installation, and then there is the aging of the rubber pad, and it is enough to replace one.

2.Noise problem, at present, in addition to the sound of the straight row is relatively loud, the sound of the siphon toilet is relatively small. If you need to reduce the noise, it is recommended that you wrap the sewer pipe with rock wool when decorating.

3.For the problem of unclean flushing, it is recommended to install a high-pressure flushing faucet next to the toilet, which is the most practical.

4.If you're not used to moving PP, here's an exclusive tip for you to tear some paper and throw it in the toilet before pooping. It is advisable to float on water with paper. (If the effect is good, please add extra points).

5.Supplement: Regardless of whether your toilet is water-efficient or not, you can fill two drink bottles with water, wrap them together with rope or tape, and throw them into the tank, so that you can save about a litre of water per flush without the same flushing effect.

Brother, you're from a ceramics factory.

We're working on this as well.

I FOUND THAT DOING SURVEYS ON BAIDU DIDN'T WORK WELL.

The questions you asked are also questions I want to ask.

We have also set up a special maintenance service team to practice it.

Let's take a look at other well-known forums.

New ones are fine. The key is that it took a certain amount of time.

1.Lift floats are not new and tend to be put on hold, 2Due to wear and tear, it is not sealed, and it is going to leak, so small that the eye cannot see it, and the water meter shines away.

3.Extended hose connection for easy maintenance.

Everything starts from the convenience of maintenance.

It is recommended that you design your own toilet and apply for a patent.