-
Anonymous users2024-01-24No, the base material of the paint door is a wood-based panel, and the surface is baked at a high temperature by eight spray baking imported paint (three bottoms, three sides, two lights) to form a process, that is, the paint is heated and dried in the drying room after the paint is sprayed. When the paint surface and the substrate are already formed as a whole, it cannot be synthesized outside in the later stage, and the solid wood is not suitable for the process of baking paint and adding surface.
But solid wood can be painted, and the painting process:
1. Detect whether the wooden door is made to meet the requirements, and the moisture content should be coordinated with the local climate 2. Use sandpaper to remove burrs, wooden thorns and other debris.
3. Paint it with a sealing primer.
4. Further remove burrs and wood thorns after drying.
5. Use putty such as putty to scrape and polish, which generally requires two to three layers (open can avoid this step).
6. Paint the white primer 2-3 times (open painting can be done once) 7. Further polish and repair the defective parts with putty.
8. Paint the topcoat two to 3 times, and the last time you need to polish it for the last time.
-
Anonymous users2024-01-23The rough surface of solid wood particle board is not best used for the baking paint process, if it is hard to use it for the baking paint process, it will be very laborious and laborious.
The solid wood lacquered door is an all-wood structure, and the solid wood composite door is made of solid wood keel as a frame, and the middle space gap is about 10cmx10cm, which is filled with honeycomb paper or not. There is a big difference in price between the two. Composite doors are also divided into paint and paint-free (veneer), if you use it indoors, composite doors can be, after all, the price is low and practical, and the weight is relatively light, and the load on the door frame is small. >>>More
Solid wood particle board and particleboard are actually the same materials. They are wood-based panels made of wood or other lignocellulosic materials, which are glued and hot-pressed. It's just that solid wood particle board can also be regarded as an upgraded product of particleboard. >>>More
Quality is fundamental.
The quality of the wooden door manufacturing process directly affects the service life of the wooden door. Generally speaking, after a period of use, wooden doors are often prone to deformation and cracking, which reduces the sound insulation effect, sealing and performance of the door. Therefore, the wooden door with guaranteed production process is not easy to deform and crack because of its low moisture content of the wood. >>>More
Multi-layer solid wood royal reform.
Lacquered plates. The surface is strictly treated after 6 times of baking and lacquering process. (Four bottoms.) >>>More
Lacquered glass is a highly expressive variety of decorative glass, which can be embodied by spraying, rolling, screen printing or spraying. Lacquered glass is also called back-lacquered glass in the industry, which is divided into flat lacquered glass and frosted lacquered glass. It is to spray paint on the back of the glass and bake it in the oven at 30-45 degrees for 8-12 hours, and it is generally dried naturally in many places where lacquered glass is made, but the adhesion of the paint surface of natural drying is relatively small, and it is easy to fall off in a humid environment. >>>More