What to do if the solid wood floor gets into the water

Solid wood flooring is a kind of high-grade flooring, which has won wide popularity because of its fidelity, naturalness, purity and changeable shape. However, if water enters accidentally, it may damage the floor, affecting the aesthetics and longevity of the floor. Here's how to deal with solid wood floors after they get into the water.

1.The first step is to clean up the water immediately. If the water is overflowing from the pipe, the valve of the pipe inlet should be closed first to avoid increasing the amount of water entering the pipe.

Then immediately use a water absorber, rag and other items to clean up the water soaked in the water as much as possible, so that some of the water can be sucked away to achieve the purpose of slowing down the damage.

2.The second step is to speed up drying. Use an electric fan or dehumidifier to dry out the environment around the water-damaged floor.

Or take the removed floor plate to dry in the sun or a well-ventilated place, so that the surface and the bottom can be dried to avoid moisture from penetrating into the floor, resulting in deformation and other problems.

3.The third step is to repair the floor. If the solid wood floor is deeply damp, the surface of the burning ants has obvious discoloration and deformation, and the damaged floor needs to be replaced and reinstalled.

This is a time-consuming and laborious job that requires professional work. However, if it is only a shallow area with moisture, you can wipe the floor clean before carrying out anti-mildew treatment, such as air-drying and burying, wiping with formaldehyde solution, etc.

4.The fourth step is moisture-proof treatment. If the solid wood floor is accidentally damaged due to the long-term construction of the furniture, you can consider opening a new small door in the corner of the ground wall - "small room door", and install a large bay window in your room to keep it ventilated and increase the air flow in the room.

In short, the solid wood floor should be cleaned immediately after water ingress, and then dried and moisture-proof to ensure that the floor will not be seriously damaged. If there is significant damage, the floor slabs will need to be reinstalled. Therefore, it is recommended to carry out tailor-made services when installing solid wood flooring to avoid the risk of damage caused by unsuitable quality selection or poor construction.

Solid wood flooring is a relatively high-end flooring material, but if there is water ingress, trouble will come, because solid wood flooring will be deformed, warped and even fall off, affecting the appearance and use. If water gets into the hardwood floor, what should we do about it? It's so stuffy.

1.Clean up immediately.

As soon as you notice water on the floor, clean it up immediately, otherwise the moisture remaining on the floor will cause rot and lead to mold multiplication, making the floor more fragile.

2.Dried. Give the floor enough time to air dry, use a hygroscopic dry towel or suction tool to absorb the water, and then use a hair dryer to dry the ground. Be sure to blow dry well to avoid worsening the consequences of moisture residue.

3.Use a dehumidifier.

If the moisture has penetrated under the ground and left a lot of moisture, it is best to use a dehumidifier to gradually suck the moisture out to avoid underground deterioration and mold growth.

4.Replace damaged floor panels.

If the floor is noticeably warped and rotten, the damaged slab can be pried open and replaced with a new one. If only part of the damage is made, only the damaged area needs to be replaced, so as not to lose the aesthetics and construction cost of the entire ground.

In short, after the solid wood floor is flooded, immediate action needs to be taken to clean up the water and air dry the floor to avoid further damage. Finding professionals to solve problems can save a lot of trouble, and the decoration industry is homogeneous and heterogeneous, mixed, and it is very important to choose professional manufacturers.

First, blot the water off the floor. At the same time, you can use a water absorber to absorb water vapor in the splicing gap of the soaked floor, or use a hair dryer to dry it with cold air. Secondly, if the joint is only a small area of warping, you can use a heavy object to press on it, and after a while, the wooden floor will return to normal on its own.

If, after a period of time, the joints have to bulge, but they are too far from the original shape of the previous floor, you can try waxing the floor, and the soaked floor after waxing will basically be almost the same as the original. If the color and shape of the floor are still very different from the original state after waxing, then only a partial replacement of the floor is required. Again, if there is a large area of water soaking, the floor after-sales service office should be notified in time.

If it is a solid wood floor, carefully pry up the floor under the condition of keeping the floor not deformed, and place it in a ventilated place to dry it according to the tic-tac-toe shape, and use the weight generated by its stacking to prevent the occurrence of deformation. If it is laminate flooring, quickly remove the baseboard of the floor, expose the expansion joint, rely on the expansion joint to dissipate the water vapor, according to the size of the seepage water, it usually takes about three to ten days to dry, and the general laminate floor is likely to be used again after soaking in water in a large area.

First, blot the water with a dry rag as soon as possible.

Second, open windows and ventilate more.

Thirdly, using a new toilet drawer can reduce the amount of water, and even if you can't pump out the water, you should try to remove the humid air as much as possible!

Fourth, the solid wood floor has a small area of water, and a high-power vacuum cleaner can be used to suck out the water vapor, but a large area of water needs to be pried up and dried on the floor.

1. The first thing to do is to dry the water, first wipe the water on the surface of the floor with a dry cloth, and then choose a practical vacuum cleaner to suck up the water vapor in the splicing gap of the soaked floor or use the cold air stall of the hair dryer to dry; Next, you can use some heavy objects to press on the small area of the warped area, and after a while, the wooden floor will return to normal on its own.

If it is deformed, 4. Add keel, and the small area of the solid wood floor soaked in water can be found in time after the ground is cleaned, pry the board up, and reinstall the wet floor after drying; If the water inflow is slightly large, not only should the board at the leakage be pried up, but also the opposite board should be pried up along the direction of the keel arrangement, so that the internal air circulation can take away the moisture. If you can't determine the size of the incoming water, it is best to pry up the board in turn according to the flow direction of the inlet water to check the humidity situation to be foolproof. 5. After all, it is passive to prevent water ingress into the floor, and it is the best choice to take precautions.

Usually, pay more attention to the window not to open wide to prevent rain; Always check the air conditioner, plumbing pipes, and washing machine for water leaks. At present, the floor wax mainly plays the role of cleaning and maintenance, and cannot be completely waterproof, so it is very necessary to do early prevention.

Hope it helps, thank you. Give it a thumbs up.

Hello, convenient words. Follow me, and feel free to contact me if you have any questions.

If there is a lot of water coming in, quickly remove the floor, dry the water inside, the water on the keel, and then re-pave it

If it's not too serious, it doesn't matter much, but if it's serious, you can only remove it and let it dry naturally to see if it can be used, because if it's too serious and deformed, there's nothing you can do.

Hey, solid wood is not as good as cork. Easy to care for.

Dismantle, dry, resurface.