There is a network port in every room at home, which is equipped with a 10M optical fiber line, but

Updated on Living room 2024-08-21
6 answers
  1. Anonymous users2024-01-24

    It seems that you are a separate parallel network cable in each room, you can go to the access network cable (generally near the door) to configure a switch, connect the access optical fiber to the switch through the optical modem, and connect the network cable of other rooms to other ports of the switch in turn.

  2. Anonymous users2024-01-23

    Hello, it is recommended that you turn off the automatic connection in your computer and change your IP address, the IP address of each computer is different. That's it. Hope it helps.

  3. Anonymous users2024-01-22

    Hello. Please check whether the network socket in each room is available, generally speaking, fiber to the home can only be connected to the Internet after the optical modem transfer.

  4. Anonymous users2024-01-21

    Check where the wiring in each room is linked.

    In general, all network ports need to be connected to the hub.

    Then the fiber modem connects the main line to the router - the HUB can all the lines be connected.

  5. Anonymous users2024-01-20

    Take a look at whether the network cable is open except for the living room, and it stands to reason that it is the same. (The network to the route is not connected, the wireless networking icon will still be there, it is certain that the routing and fiber network in the room will definitely not work.)

  6. Anonymous users2024-01-19

    Because there is only 1 fiber connected to your home, you can only use the wireless router on the main line and then distribute it from the router to other places.

Related questions
How to make the network port in each room have a network, the living room has a router, but my room
3 answers2024-08-21

This depends on how your family took the line at that time, find the convergence point of the line, put a switch there, and then connect a network cable on the router in the living room to the nearest network port.

There is a network connection in every room in the house, but there is only one network cable in the
2 answers2024-08-21

In your weak current box, you look for where the weak current box in your home and the optical fiber incoming line are.

The home is a duplex apartment, each room has a broadband internet interface, and the router is down
1 answers2024-08-21

Generally, the wiring of the family is to summarize the network cables of each room into the collection cabinet behind the TV wall in the living room, and the broadband home line (ADSL telephone line or community broadband network cable or optical fiber) is also in this cabinet. All you have to do is connect the home line to the WAN port of your routing (if it is ADSL or fiber, of course, you must connect it first.)

Home telecom fiber 20M, each room has a network cable jack. How to divide in the living room and bed
6 answers2024-08-21

1. The router is placed in the living room, and the network cable of each room is plugged into the router in the living room, and then you can access the Internet in any room with network cable. >>>More

The light cat at home is in the living room, there is a network port on the wall of the room, and th
4 answers2024-08-21

How to connect the optical modem to the wireless router:

1.Connect the WAN port of the router to the LAN port of the modem with a network cable, and the WAN port of the router flashes to indicate that the connection is normal. Ways to configure a wireless router:1The system is connected to the router. >>>More