-
Anonymous users2024-01-24There is a lot of smoke in the kitchen, you look at the next switch and socket to see if there is a leakage place, try one by one.
You first turn off all the load switches, close the switch, and then send power to the lighting, ventilation, air heating 1, air heating 2 and so on, and turn off the lights in turn after no problem, for example: turn on the lighting, and turn off the lighting switches if they don't trip. In the opening ventilation and so on! >>>More
It may or may not be pushed up one day, because it will dry if it is light, but if there are pulp crumbs into it, it will not dry for a while, so it is recommended to take it apart and clean it thoroughly.
The lights in the two places are not lit, it must be a problem with the switch or line, check whether the air switch responsible for lighting is in place, and whether the incoming and outgoing lines of the air switch are firmly connected, I hope to adopt thank you!
Swap the leakage protection switches in the kitchen and living room. After the exchange, if the kitchen still trips when using electricity, it means that the kitchen appliances are leaking or there is a problem with the insulation of the kitchen circuit. If the kitchen electricity is no longer tripped after the exchange, it is a problem with the leakage protection switch. >>>More
Low-level error: Typical neutral line mix!
The load of the lighting circuit is limited, and the output of the lighting circuit breaker (neutral live wire) where the neon sign is located is merged into the output of the socket leakage circuit breaker, and the lighting circuit breaker is empty. If it is newly renovated, negotiate with the merchant to increase the rated current of the socket leakage circuit breaker by a grade, and it is not a big problem not to change it. >>>More