Can cabinets made of solid wood be painted, and is it good to paint

Updated on Solid wood 2024-08-10
7 answers
  1. Anonymous users2024-01-24

    The 2nd floor may not have been painted, too unprofessional. If it is a brush, be sure to paint it with a professional hand, because the leveling is better and there will be no obvious brush marks. At the same time, there are now professional environmentally friendly water-based hand paints, which have no impact on the use of more ventilated rooms.

    Note: Before painting the wood grinding batch ash oil grinding must be done!

  2. Anonymous users2024-01-23

    It can be brushed, and the effect should be good from the surface, but it will also cause a certain amount of pollution to the indoor air.

  3. Anonymous users2024-01-22

    I don't have a brush at home, but I will buy some care products for it to maintain regularly!

    I'll tell you the name of the product and let you share it.

    Call "Dr. Fang" wood floor care essential oil! It works great!

    By the way, who are you?

  4. Anonymous users2024-01-21

    brushing clear water paint; If you want to color, you should brush at least once with clear water paint, and then brush with latex paint.

  5. Anonymous users2024-01-20

    Blockboard is mainly a certain specification of solid wood slats, glued, billet made into core board, upper and lower sides of the plywood, processed under high temperature and high pressure, and then sanded and other surface treatment, commonly known as "large core board". Blockboard has the advantages of large size, easy sawing, strong material toughness, strong bearing capacity, not easy to crack, etc., and the board itself has strong moisture-proof and strong nail holding force, which is convenient for comprehensive use and processing. Therefore, it is often used by home improvement carpenters to make simple furniture and cabinets, due to the use of a large number of glue for bonding in the manufacturing process, so the overall environmental performance is poor, due to the use of plywood on the surface (commonly known as three-layer board, multi-layer board) resulting in poor surface flatness, often use putty for leveling and painting after painting, so it further aggravates the shortcomings of poor environmental protection, so the strength of the cabinet manufacturers generally no longer use.

    Now the decoration of the home store also prohibits large core boards.

  6. Anonymous users2024-01-19

    Yes , but it is necessary to paint it first, preferably 2 times, believe me I make cabinets.

  7. Anonymous users2024-01-18

    In fact, to put it bluntly, the color of solid wood is brushed, but a special oil should be used, not ordinary paint.

Related questions
4 answers2024-08-10

Yes , but it is necessary to paint it first, preferably 2 times, believe me I make cabinets.

3 answers2024-08-10

When the weather is dry, there is less moisture in the furniture, and this is when the paint is best.

1 answers2024-08-10

There will still be some chemical components in the home adhesive, and it is recommended to open more windows for ventilation.

1 answers2024-08-10

It also depends on what kind of wood it is, ordinary wood is not painted for a long time, and dirty things will be printed into it, and it is not easy to clean, and it is not smooth to touch! Thank you for adopting.

2 answers2024-08-10

Yes, first evenly brush the white latex for carpentry in the place where you want to stick the wood grain (the diluted one should not be too thick), and then spread the cut wood grain paper in a large basin of water to make it wet, but not crumple, carefully stick it to the place where you have brushed the glue, smooth it with a wool brush, if there are air bubbles, you can use a soft rubber sheet to scrape it until it is flat, and you can paint it after drying. >>>More