-
It's very simple to deal with, use a few drops of special lock lubricating oil to remove rust and smooth.
Most of the well-known lock factories such as Escola use fully synthetic lock lubricants from Hotolube or Kluber. Fully synthetic base oil production, clear and transparent, colorless and odorless, low temperature resistance, no dust. Tao Feng has a 30ml needle-nosed small oil bottle, which can be dropped with a few drops, which is easy to use.
The service interval is six months.
Mineral oil should not be used because it is highly viscous and tends to get dirty. It is also not suitable to use pencil end or black graphite lubrication, which cannot lubricate the internal parts, and there will be heavy metal and color pollution.
-
You can clean it with cooking oil first, and if it doesn't work, you're cleaning it with engine oil.
-
Just spray the lock cylinder with a pesticide.
-
Take a membership card and scratch it down on the object.
-
There is no gasoline, drip point. Or Vaseline will do.
-
Why bother to make so much effort here, go out and call a locksmith to come over, if you want to return the lock like this, you can only smash it.
-
It's very simple, use a special lock lubricating oil to drop a few drops to remove rust and smooth.
Most of the well-known lock factories such as Escola use fully synthetic lock lubricants from Hotolube or Kluber. Fully synthetic base oil production, clear and transparent, colorless and odorless, low temperature resistance, no dust. Tao Feng has a 30ml needle-nosed small oil bottle, which can be dropped with a few drops, which is easy to use.
The service interval is six months.
Mineral oil should not be used because it is highly viscous and tends to get dirty. It is also not suitable to use pencil end or black graphite lubrication, which cannot lubricate the internal parts, and there will be heavy metal and color pollution.
-
Mine door too, get some oil from the sewing machine, get it into the pipe and pour it down the keyhole, and wipe the key with oil as well.
-
Is there gasoline put on a few points and it will be turned on in a few hours.
Extrusion and plugging method:
1. Wipe the edge of the toilet bowl clean; >>>More
1. Slight blockage of the toilet: Generally, the toilet blockage is caused by toilet paper or sanitary napkins, towel rags, etc., which can be dredged directly by using a pipe dredging machine or simple dredging tools. >>>More
Throw the computer in the toilet bowl and let it play, with the IQ of the toilet bowl it should soon be gone. If it's gone, it's not blocked
After draining the water, use a toilet bowl to press it down against the toilet drain to expel the air, and then lift it up to suck out the foreign body. Repeat a few more times until you start to get into the water. >>>More
Hurry up and call 120, do you still need to ask?