Mahogany furniture has a kind of paint, which will not turn yellow when it is done

Mahogany furniture paint construction process:

1. Embedded putty is used to fill nail holes, insect eyes, gaps, cracks and other defects. Use coarse sandpaper to polish all the areas that need to be painted, pay attention to the corners not to polish too much, and keep the original shape of the furniture. Dip a cloth in water to make it semi-wet, and wipe the powder off the freshly sanded furniture.

2. Take the fine sandpaper and re-polish it, paying attention to the corner. Then use a cloth to clean the powder.

3. Take the paint, brush, and open the paint cover. Dip the brush in a paint bucket and don't get too much paint at once. The rules for painting are from top to bottom, from left to right. Be careful to paint corners and hidden areas as well.

4. Leave the painted furniture for four to five hours until the paint is dry. Also, after the paint has dried, use fine sandpaper to sand the furniture from beginning to end. This time the purpose of grinding is to smooth out the uneven parts of the paint, which is conducive to continuing to paint later.

5. Follow the second step above to paint for the second time. Note that if the paint is too thick, you can add an appropriate amount of rubber water, dilute the paint and then brush. Then continue to dry and sand.

6. Brush the paint again according to the above steps, so that the paint of the furniture is finished.