-
Anonymous users2024-01-24The waterproof brush is above the height of the ceiling, generally two meters and two, and the width of the sill stone is equivalent to the thickness of the door opening wall, so that there is no need to cut the tiles separately.
Turn the ground next to the door, and make a gentle slope with the same stone instead.
The primary purpose of the bathroom sill stone is to prevent water from backing up into the room, so it is slightly different from the sill stone in other spaces in terms of construction. When waterproofing the bathroom, first paste the wall tiles and then do the floor waterproofing. In this way, even if the bricklayer works on it, the fragments of people, bricks, and materials will not affect the waterproof coating on the ground, and will not cause waterproof failure. >>>More
Install an aluminum alloy track under you to block it.
1, can no longer lay the keel, because if the keel after the height of the floor will be higher than 1 meter, now the only way is to lay a composite floor or reinforced composite, there is 1 cm thick, otherwise you have to re-smash the floor. >>>More
Method 1: Make a "water-stop pier" under the threshold, that is, an N-shaped threshold, fill it with waterproof cement, the height should be higher than the floor of the living room, and then pave the tiles. This increases the height of the aquifer and blocks the "siphon" effect. >>>More