-
Anonymous users2024-01-24The slope of the ground of the bathroom is generally between 1 and 3, mainly to consider the location of the floor drain, such as the floor drain in the middle of the room, the slope water can be appropriately smaller, if the location of the floor drain is more partial, the slope water is appropriately larger. According to the principles of traditional Chinese Feng Shui, the floor of the bathroom should not be higher than the floor of the bedroom, especially the position of the bathtub should not have a feeling of being on top. The Five Elements Theory believes that water flows downward, and living in a bedroom moistened by water for a long time is prone to diseases of the endocrine system.
The answer is supplemented by the small bathroom flooding slope upstairs said 2 Yes. You can't have a big bathroom, you think, your more than 2 meters of ground height difference should reach 4CM, plus the cement under the bricks, how much higher it will be.
The state stipulates that the flooding slope is 1.
You can make the slope of the shower area larger, and the slope of the rest of the area is smaller.
Don't pay attention to the floor just because the bathroom is a small place, be sure to pave the tiles. Laying cheap tiles will result in water absorption and color differences. The slope of the bathroom floor should be considered before laying bricks, according to the slope of the national standard can not achieve the effect of rapid drainage, and if you use an anti-odor floor drain or ultra-thin floor drain, it will greatly aggravate the difficulty of drainage.
Some people say that the slope is not beautiful, but I think on the contrary, it is very pleasant that the slope is larger and the water can run away quickly.
-
Anonymous users2024-01-23THE SUNKEN TOILET GENERALLY FALLS 350MM, THE DRAINAGE PIPE SHOULD BE CONSTRUCTED AFTER THE COMPLETION OF THE CONSTRUCTION OF THE WATERPROOF LAYER OF THE FALLING PLATE, AND THE CEMENT PIER IS FIXED ON THE WATERPROOF LAYER, AND THE SLOPE IS GUARANTEED, AND THE HEIGHT OF THE DRAINAGE PIPE FROM THE WATERPROOF LAYER IS GENERALLY 30-50MM, AND THEN BACKFILL THE SLAG, AND THEN DO THE WATERPROOF LAYER AND THE PROTECTIVE LAYER.
-
Anonymous users2024-01-22Extremely upward in a happy family. In this era of rampant materialism and cold family affection, it can be made in such a family, and the repost can be upgraded anyway.
It is best to pour water with a bucket and drain it in 30 seconds.
Fix one or two pieces at the door, and then find out the height at the floor drain, hang the line and pave it, and the slope will naturally go out.
About 5 degrees, just don't have standing water.
Ground slope. Basic interpretation: the tangent value of the acute angle between the slope and the ground can be understood as the ratio of the height difference between two different points on the slope and its horizontal distance, or the angle between a diagonal line drawn from the top of the measured slope to the bottom of the slope and the horizontal plane based on the horizontal plane, which is the ground slope. >>>More
Because there is a lot of water in the bathroom, in order to let the water flow into the floor drain as soon as possible, the ground must do a certain slope, and there are no specific regulations on the size of the slope. Some owners need a steeper slope, in order to make the water flow faster, even if the water is not smooth, when bathing, the water will not flow outside. >>>More
The bathroom is a place where water is used for a long time, especially if there is water on the ground for a long time, use mortar waterproofing agent to do it at least 2 times (one mortar, one plain slurry), and the thickness is at least 20mm (the yin and yang corners and around the nozzle can be done carefully); The wall can be used once and the thickness is 8-10mm.