-
Anonymous users2024-01-24Methods of wardrobe insect prevention.
Lacquer painting. For some corners that have not yet been damaged, paint the surface of the wooden cabinet with raw tung oil, shellac paint or varnish to isolate the moth from the air and achieve the purpose of moth-prevention. It should be noted that when painting, the front and back sides and the inner wall of the wooden cabinet should be evenly painted.
Liquid spraying. When the wooden cabinet is infested by insects, dichlorvos and water can be used to prepare the liquid medicine in the ratio of 1 5, spray it fully with a sprayer, let the liquid infiltrate into the wooden cabinet, spray 3 5 times in a row, after 8 hours, it can kill all the moths. After that, wash the wooden cabinet with clean water and dry it.
Clean, wash and dry. On a sunny day, place the wooden cabinet that has been eaten by insects in the morning sun, and paint the wooden cabinet with a brush or cotton yarn dipped in diesel oil. Dry for two or three hours and then apply it once, and then dry it again, until you see the moth dead at the mouth of the hole. Then wash with laundry detergent and dry.
Beware of termites. When insects are found in wooden furniture, you have to do a good job of termite control. Nowadays, termite medicine is also very scientific, as long as there is a poisoning, it will infect the termites in the whole hole like a virus, and all of them will be killed.
Other considerations.
Try not to put solid wood furniture in direct sunlight, it is easy to fade or even fall off if it is placed for too long, and at the same time keep away from air conditioners and heaters. A few pots of flowers or fish tanks should be placed in an air-conditioned room to maintain indoor humidity and prevent moisture from being absorbed from the furniture. Items placed on the furniture should be padded with a layer of soft film, handled gently in the vertical direction, so as not to damage the surface of the furniture, if there are scratches on the surface, you should find a professional to repair it in time.
Rubber pads should be placed on the feet of furniture to avoid damage when moving back and forth; Do not drag or drag when moving, to avoid damage caused by uneven force on the furniture. The rag used to wipe the furniture should be clean and soft, and there should be no water beads or watermarks left on the furniture.
Different areas have different material requirements for sliding doors, such as kitchen sliding doors require kitchen doors to have moisture-proof and waterproof functions, bedroom balcony sliding doors need to have environmentally friendly sound insulation solid wood sliding doors, as well as bathroom sliding doors, living room balcony sliding doors, wardrobe sliding doors, etc. Today we will take a look at the different material points of the sliding doors in these 5 areas? >>>More
Solid wood wardrobe sliding door (two doors) method:
1. Install the alloy guide rail. First, compare the thickness of the door panel, open the track groove in a suitable position, and fix the alloy guide rail with screws. >>>More
1. Try to choose brand products: consumers should choose manufacturers with good brand reputation, and measure their product structure by checking the relevant qualification certifications of manufacturers and whether the relevant industry standards are complete and true. >>>More
First, compared with the stability of the material, the natural titanium-magnesium profile is much better, which is incomparable with wood. >>>More
1 all have a special installation master, their own installation is not professional will definitely have more or less problems, it is better to ask someone to install it for you, or to the home 100 to consult how to install it, they are more professional.