-
Anonymous users2024-01-24The motor is overloaded because the motor is subjected to more force than it can withstand in order to prevent damage to the motor and the motor is de-energized.
If you want to recover, you have to wait a few minutes to shut down and restart. (If it is an instantaneous overload, it can be restarted immediately).
The gap between the tailstock body and the supporting seat is too large.
There are two types of inclined bed CNC lathe tailstock available: hydraulic and manual. >>>More
Are you sure you're talking about tailstock height??
The tailstock height is standardized at the factory, i.e. strictly the same height as the spindle center of rotation. Generally, it is not necessary to adjust. If the old machine is worn out due to the guide rails, it may need to be adjusted. >>>More
The M code can be used in any of the switch directives M03 M04 M05 M30 common code, such as machine tool factory uniformity. M10 functionality depends on the machine factory settings.
The burning motor mainly looks for problems from the following aspects: 1. The power supply voltage is too high and easy to cause insulation breakdown. If it is too low, it is easy to cause excessive current and heat burning. >>>More