-
Anonymous users2024-01-241. Material properties of the ceiling gusset.
But pure aluminum is softer, so the aluminum on the market.
If there is a buckle connection, you can see it at a glance when you go to the ceiling decoration store that sells it, and it is very simple.
It should be said that no, although the metal gusset absorbs the heat in the space, it also changes with the change of air temperature in the space, and there is no problem --- the space has enough heat to provide
It depends on how to install, if there is no glue for professional installation, the ceiling will not be affected, because the standard practice is fixed with iron nails around the body, and the gusset is fixed with expansion nails, and the glue is only used for beautification, but many non-professional installers are fixed by glue around and do not reinforce the iron nails, so that the ceiling will fall off after the glue fails. If you see that the glass glue has cracked from below, don't worry too much, there is still glue at the corners and tile fits, and there is more than what you see, but for long-term use, it is recommended to re-fill the glass glue below!
It can not be calculated according to the area, the length and width should be calculated separately according to the length and width, divided by 300 remainders, more than one piece is less than half a block, and finally multiply the two results into a piece is the required number of blocks, and then multiply the number of blocks by the area of a single block is the total area.
The configuration of the corners is the side length, the middle of the suspension bar point is a point per square meter, the main keel is 1 meter a, pay the keel is based on the gusset specifications you choose, I hope to help you.