I have a 72 square meter house practical 58 square meters to decorate, make some furniture, please

1.wall paints and primers.

2 topcoats for 1 primer in two to three sets. Actually, both sets are fine.

Theoretical paint consumption:

12-13 square meters liter single pass (dry film 30 microns) The actual area except the doors and windows cabinets, generally... Practical 58 square X3 = 174 times 4 is also available. Probably.

Due to the roughness and dilution ratio of the actual construction surface, the amount of paint consumed is also different. Thicken it.

2.How many large coreboards and woodworking boards do you need to make furniture?

It's hard to say, the carpenter will do the math for you. The plate can be returned anyway.

3.If you're doing it yourself, run the store a few more times.

Coating rate: primer 12 14 square meters per kilogram, topcoat 12 16 square meters per kilogram, coating layer: 2 matching primers, 2 3 topcoats.

To make furniture, don't use a large core board, the shrinkage is too large, the inside is too loose, choose the kind of ecological multi-layer plywood with 11 layers, the price is only a little expensive, but it is much easier to use.

It is best not to choose furniture made of woodworking, limited by manual conditions, for the drying of wood and cutting of materials can not be compared with the factory process, the process determines the quality! Secondly, the furniture made by carpentry needs to be painted by itself, which is also limited by the conditions of the artificial level, and the ratio of paint directly determines the use effect of furniture after painting and whether it is environmentally friendly! After all, the artificially blended paint is limited by conditions and is difficult to guarantee.

Moreover, the furniture made by carpentry has no after-sales service at all, because personnel are mobile!