Next to the toilet and shower, the wall is moldy

It should be the reason why the bathroom decoration is not waterproof, which causes infiltration. When decorating the house, you should do a good job of waterproofing on the floor and surrounding walls of the bathroom. The humidity in the bathroom is heavy, especially on the wall near the shower area, which is often eroded by water vapor and will cause the wall to become moldy or even fall off.

If the walls of your home have been seriously eroded, then you have to redo the waterproofing of the walls! When my house was being renovated, the decoration master told us the importance of waterproofing the house, so I went to study the waterproofing of the house, and specially chose the waterproof coating of Dunlop brand, which can be waterproof and mildewproof at the same time. Once the walls of the home are damp and moldy, it will directly affect the beauty and use of the house.

The bathroom of each house is waterproofed underneath, but there are very few walls, and there are special walls, which can be selected in the market. Generally, the choice of waterproof tiles should not be a big problem, or the water pipe in the wall is leaking, and it is best to renovate the bathroom with a waterproof coating.

Bathroom waterproofing is not done, this is generally to be renovated to solve, decoration to do a good job of the bathroom waterproof layer, and the decoration master to communicate more, keep an eye on a little bit, if you can, you can choose reliable waterproof materials, do not want to move or inconvenient, paint or paste wallpaper to cover it, try to keep the bathroom dry.

It must be that during the early decoration, the waterproofing was not done well, resulting in a long time, water seepage to a certain time, the wall can not bear it, and it will become moldy or fall off.

Solve it from two aspects, the first one is to solve it from the source, the first may be that the toilet is leaking and seeping into the wall. We can look at why there is water in the toilet and fix it if the faucet is leaking. The 2nd.

We shoveled out all the moldy walls. After that, brush the waterproof, and wait until the waterproof is all done before re-grading the ash.

The most basic thing is to do a good job of waterproofing treatment with impermeable king K11 general waterproof coating before wall decoration, and then carry out wall decoration. Don't think that you only need to do waterproofing in the toilet, the wall near the toilet and the wall that is easy to get moisture should be waterproofed. In addition, if these walls choose to be painted with latex paint, the primer and topcoat should be anti-mildew and alkali-resistant, so as to better prevent mold growth and wall dust.

There are now coatings on the Internet that are specialized in removing mold, so you can try them.