What should I do if the kitchen is white and the walls are black

It is best to remove the wall skin, and then brush latex paint on the batch putty, so that the quality can be guaranteed in the future. The method of brushing is very simple, that is, use a roller to roll out a big W or M on the wall, after the roller is finished, polish it with brush paper and clean it up, a total of two sides, and the roller can be rolled three times. It is not difficult to brush latex paint, but there are some problems that must be paid attention to by first-time do-it-yourself or decorators.

The first is to set the color. It should ———be noted that if you look at the color palette or even on the paint bucket, you may see a different color than when you paint it all over the wall. To avoid disagreement, the following steps can be taken:

Don't make the final decision about which color to use in the paint shop; Instead, take home a swatch or an actual paint sample and observe the color of the paint on the wall to be painted; Observe the color of the paint separately in natural light and night light, because even the same paint and the same color can appear very different in different lighting conditions. At the same time, it is important to keep in mind that when you paint a larger area with one color, the color tends to be heavier. To compensate for this, it is better to use a paint that is slightly lighter than the desired color.

Coatings come in a variety of gloss levels, ranging from "high-gloss" to "flat-gloss". Paints with higher gloss levels are more reflective, so this paint will make the room look brighter. But on the other hand, high-gloss paints tend to highlight the shortcomings of the wall, so if the wall is not very flat, it is advisable to choose a flat paint.

Second, choose the right applicator tools and brushes. A good quality tool can produce a thicker coating, which can better cover the original color of the underlying layer, and can make the paint film more durable and withstand repeated scrubbing. With paint and suitable tools, you should use ordinary cleaners or water to remove dust and dirt from the wall before you start painting it, and let it dry.

If there is a nail hole in the wall, fill it with filler. Tiny cracks can be filled with high-quality 100% acrylic caulk. Painting interior walls is as simple as using a brush to create a "frame" on the outer edge of the wall, and then using rollers to roll inside the "frame".

An effective way to apply a roller is to use a roller dipped in paint to roll out a large "W" or "M" shape on the wall, then fill it with it and roll it in different directions.